Seat Heater System Data List / Active Test

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DATA LIST

Seat Heater System -- Data List / Active Test



DATA LIST
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Air Conditioner / Data List.

  5. Read the Data List according to the display on the GTS.

    Air Conditioner
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    FR Seat Heater Temperature
    		Front seat RH side seat heater temperature / min: -29.7 °C or max: 59.55 °C
    		Within range from 36 to 43 °C (96 to 109 °F)
    		Front seat heater is on
    FL Seat Heater Temperature
    		Front seat LH side seat heater temperature / min: -29.7 °C or max: 59.55 °C
    		Within range from 36 to 43 °C (96 to 109 °F)
    		Front seat heater is on
    Number of Trouble Codes
    		Number of trouble codes / min: 0 or max: 255
    		Number of DTCs will be displayed
    		-