Curtain Shield Airbag Cutoff Switch Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Supplemental Restraint Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

  4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  8. REMOVE NO. 1 SWITCH HOLE BASE

  9. REMOVE CURTAIN SHIELD AIRBAG CUTOFF SWITCH

Curtain Shield Airbag Cutoff Switch -- Removal


HINT:
  1. Use the same procedures for the RH and LH.
  2. The procedures listed below are the LH side.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Curtain Shield Airbag Cutoff Switch Removal

  1. Put protective tape around the No. 2 instrument panel finish panel cushion.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.



3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the clip and screw.

  1. Detach the 8 claws.

  1. Disconnect the connectors, detach the 2 clamps and remove the lower instrument panel pad sub-assembly.



4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Curtain Shield Airbag Cutoff Switch Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 3 claws and remove the No. 1 instrument cluster finish panel garnish.



5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. Place protective tape as shown in the illustration.



  1. Using a moulding remover, detach the 2 claws and remove the No. 2 instrument cluster finish panel garnish.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Curtain Shield Airbag Cutoff Switch Removal


    Text in Illustration
    *A
    		w/ Entry and Start System
    		*B
    		w/o Entry and Start System
    *1
    		Protective Tape
    		-
    		-


6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws.

  1. Detach the 3 claws.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover.



7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Curtain Shield Airbag Cutoff Switch Removal

  1. Using a screwdriver, detach the 2 claws and open the hole cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


  1. w/ Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 16 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Curtain Shield Airbag Cutoff Switch Removal



  1. w/o Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 9 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Curtain Shield Airbag Cutoff Switch Removal



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for Automatic Air Conditioning System:

    1. Detach the 2 claws and remove the room temperature sensor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and disconnect the 2 control cables.

  1. Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.



8. REMOVE NO. 1 SWITCH HOLE BASE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws.

  1. Disconnect the connectors and remove the No. 1 switch hole cover.



9. REMOVE CURTAIN SHIELD AIRBAG CUTOFF SWITCH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the switch.