Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE ENGINE MECHANICAL
DRIVE BELT - INSTALLATION
| 1. INSTALL FAN AND GENERATOR V BELT |
Set the V belt onto every part.
| *1 | Vane Pump |
| *2 | Water Pump |
| *3 | No. 2 Idler |
| *4 | Generator |
| *5 | Cooler Compressor or Idler Pulley |
| *6 | No. 1 Idler |
| *7 | Crankshaft |
| *8 | V-ribbed Belt Tensioner |
While turning the belt tensioner counterclockwise, remove the pin.
- NOTICE:
- Make sure that the V belt is properly installed to each pulley.
Check that the belt fits properly in the ribbed grooves.
- HINT:
- Make sure to check by hand that the belt has not slipped out of the grooves on the bottom of the pulley.