Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200
Electrical Key Oscillator (For Outside Luggage Compartment) -- Installation |
| 1. INSTALL ELECTRICAL KEY ANTENNA |
Attach the guide to install the electrical key antenna.
 |
Install the 2 nut and connect the connector.
| 2. INSTALL REAR BUMPER COVER |
- HINT:
- For the rear bumper cover with tire carrier, use the procedures described below.
w/ TOYOTA Parking Assist-sensor System or w/ Rear Fog Light:
Connect the No. 2 frame wire connector.
Attach the 14 claws to install the rear bumper cover.
Install the 7 bolts, 6 screws and 2 clips.
Open the tail gate and install the 4 clips.
Close the tail gate.
| 3. INSTALL REAR NO. 1 BUMPER PLATE |
Attach the 20 claws to install the rear bumper No. 1 plate.
| 4. INSTALL REAR QUARTER PANEL MUDGUARD LH |
Attach the guide to install the front fender mudguard LH.
 |
Install the clip.
Using a T30 "TORX" socket, install the 4 screws.
| 5. INSTALL REAR QUARTER PANEL MUDGUARD RH |
Install the rear quarter panel mudguard RH with the 2 clips.
 |
Using a T30 "TORX" socket, install the 7 screws.
| 6. INSTALL SPARE WHEEL CARRIER SUB-ASSEMBLY (w/ Tire Carrier) |
Install the spare wheel carrier sub-assembly (Click here).
| 7. INSTALL PINTLE HOOK ASSEMBLY (w/ Pintle Hook) |
Install the pintle hook assembly (Click here).