Entry And Start System (For Start Function) Engine Switch Indicator Circuit

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

INSPECT ENGINE SWITCH

CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - ENGINE SWITCH AND BODY GROUND)

ENTRY AND START SYSTEM (for Start Function) - Engine Switch Indicator Circuit


DESCRIPTION

Engine switch condition (power source mode) or system malfunctions can be checked by observing the status of the engine switch indicator light.

Engine Switch Indicator Light Condition
Power Source Mode/Condition
Indicator Light Condition
Brake pedal released (for A/T)
Clutch pedal released (for M/T)
Brake pedal depressed, shift lever in P or N (for A/T)
Clutch pedal depressed (for M/T)
Off
Off
Illuminates (Green)
Illuminates (Green)
On (ACC, IG)
Illuminates (Amber)
Illuminates (Green)
Illuminates (Green)
Engine running
Off
Off
Off
Steering lock not unlocked
Flashes (Green) for 30 sec.
Flashes (Green) for 30 sec.
Flashes (Green) for 30 sec.
System malfunction
Flashes (Amber) for 15 sec.
Flashes (Amber) for 15 sec.
Flashes (Amber) for 15 sec.
Clutch start switch malfunction (for M/T)
Flashes (Green) for 15 sec.
Flashes (Green) for 15 sec.
Flashes (Green) for 15 sec.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Engine Switch Indicator Circuit


INSPECTION PROCEDURE

1.INSPECT ENGINE SWITCH
Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Engine Switch Indicator Circuit

  1. Disconnect the E18 engine switch connector.

  1. Apply battery voltage between the terminals of the engine switch, and check the illumination condition of the engine switch indicator light.

    NOTICE:
    1. If the positive (+) lead and the negative (-) lead are incorrectly connected, the engine switch indicator light will not illuminate.
    2. If the voltage is too low, the indicator light will not illuminate.
    OK:
    Measurement Condition
    		Condition
    		Specified Condition
    Battery terminal (+) → Terminal 11 (SWIL) - Battery terminal (-) → Terminal 5 (GND)
    		Battery voltage is applied to the terminals
    		Illuminates
    Battery terminal (+) → Terminal 12 (INDS) - Battery terminal (-) → Terminal 5 (GND)
    Battery terminal (+) → Terminal 13 (INDW) - Battery terminal (-) → Terminal 5 (GND)
    Result
    Result
    		Proceed to
    Illuminates
    		A
    Does not illuminate (for 1GR-FE)
    		B
    Does not illuminate (for 1UR-FE)
    		C
    Does not illuminate (for 3UR-FE)
    		D
    Does not illuminate (for 1VD-FTV)
    		E


B
REPLACE ENGINE SWITCH (Click here)

C
REPLACE ENGINE SWITCH (Click here)

D
REPLACE ENGINE SWITCH (Click here)

E
REPLACE ENGINE SWITCH (Click here)
A


2.CHECK HARNESS AND CONNECTOR (MAIN BODY ECU - ENGINE SWITCH AND BODY GROUND)

Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Engine Switch Indicator Circuit

  1. Disconnect the E1 main body ECU connector.

  1. Disconnect the E18 engine switch connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E1-25 (SWIL) - E18-11 (SWIL)
    		Always
    		Below 1 Ω
    E1-15 (INDS) - E18-12 (INDS)
    		Always
    		Below 1 Ω
    E1-14 (INDW) - E18-13 (INDW)
    		Always
    		Below 1 Ω
    E18-5 (GND) - Body ground
    		Always
    		Below 1 Ω
    E1-25 (SWIL) or E18-11 (SWIL) - Body ground
    		Always
    		10 kΩ or higher
    E1-15 (INDS) or E18-12 (INDS) - Body ground
    		Always
    		10 kΩ or higher
    E1-14 (INDW) or E18-13 (INDW) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE MAIN BODY ECU