Entry And Start System (For Start Function) Customize Parameters

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CUSTOMIZE ENTRY AND START SYSTEM (for Start Function)

Entry And Start System (For Start Function) -- Customize Parameters



1. CUSTOMIZE ENTRY AND START SYSTEM (for Start Function)
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Customizing with the GTS

    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Customize / Entry&Start or Warning.

    5. Select the setting by referring to the table below.

      Entry&Start
      Display
      		Default
      		Content
      		Setting
      		Relevant ECU
      Ignition Available Area
      		All
      		Function that sets the area that the key must be in before the engine switch can be operated.
      		Front or All
      		Certification ECU (smart key ECU assembly)
      Auto Entry Cancel SW
      		ON
      		Function that enables or disables the push-button start system.
      		OFF or ON
      Engine Start Indicator
      		ON
      		Function that turns the key warning light on the combination meter assembly on or off.
      		OFF or ON

      Warning
      Display
      		Default
      		Content
      		Setting
      		Relevant ECU
      Key Low Battery Warning
      		ON
      		Enables or disables the sounding of the buzzer when the transmitter battery is low and the engine switch is turned off after being on (IG) for 20 minutes or more.
      		OFF or ON
      		Certification ECU (smart key ECU assembly)

  1. Entry cancel function (manual operation)

    HINT:
    While the entry and start system is canceled, it is possible to lock and unlock the doors with the wireless operation, and the start system can be operated by holding the electrical key transmitter sub-assembly near the engine switch.

    1. The following functions are disabled when the entry and start system is canceled.

      1. Entry unlock/lock functions
      2. Push-button start function
      3. Key lock-in prevention function
      4. Entry warning functions

    2. When canceling the system through manual operation:

      1. Make sure the following conditions are met:
        1. The engine switch is off.
        2. The driver door is closed.
        3. The driver door is unlocked.
      2. Press the unlock switch of the electrical key transmitter sub-assembly.
      3. Open the driver door within 5 seconds of completing the step above (driver door: close condition → opened).
      4. With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times within 5 seconds of completing the step above.
        NOTICE:
        If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.
      5. Perform the following procedure within 30 seconds of completing the step above.
        1. Close and open the driver door twice (driver door: open → closed → opened → closed → opened).
        2. With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times.
          NOTICE:
          If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.
        3. Close and open the driver door (driver door: open → closed → opened).
      6. Close the driver door within 5 seconds (driver door: open → closed).
      7. Check that the wireless buzzer sounds twice (short beeps) to confirm that the smart entry and start system has been canceled.

    3. Perform the following procedure to restore the entry and start system to the active state from the canceled state.

      1. Perform the procedures to cancel the entry and start system again.
      2. Check that the wireless buzzer sounds once (short beep) to confirm that the entry and start system has been restored to the active state.
        HINT:
        1. The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.
        2. The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.