Entry And Start System (For Start Function) Operation Check

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. OPERATION DESCRIPTION

  1. CHECK PUSH-BUTTON START FUNCTION

  1. CHECK TRANSMITTER BATTERY SAVING FUNCTION

  1. CHECK POWER SOURCE MODE CHANGING FUNCTION

  1. CHECK POWER SOURCE MODE INDICATION

Entry And Start System (For Start Function) -- Operation Check



OPERATION DESCRIPTION
NOTICE:
Make sure that the entry and start system (for Start Function) has not been canceled before performing this inspection.


  1. Push-button start function (for Automatic Transmission):

    1. When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the brake pedal is depressed, the engine is started by pressing the engine switch.

    2. When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the brake pedal is not depressed, the power source mode is changed by pressing the engine switch. The power source mode changes in the following order every time the engine switch is pressed: off → on (ACC) → on (IG) → off.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    3. After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the engine switch is pressed while not depressing the brake pedal, the power source mode changes to on (ACC) and "ACCESSORY" is displayed in the combination meter assembly.

      Text in Illustration
      *a
      		"ACCESSORY" Display


      4. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    4. After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the engine switch is pressed 2 times without depressing the brake pedal, the power source mode changes to on (IG) and "IGNITION ON" is displayed in the combination meter assembly.

      Text in Illustration
      *a
      		"IGNITION ON" Display

    5. After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the brake pedal is depressed while the shift lever is in P or N, the key warning light is displayed in the combination meter assembly.



      6. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    6. The engine starts if the engine switch is pressed when the key warning light is displayed.

      Text in Illustration
      *a
      		Key Warning Light Display


  2. Push-button start function (for Manual Transmission):

    1. When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the clutch pedal is depressed, the engine is started by pressing the engine switch.

    2. When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the clutch pedal is not depressed, the power source mode is changed by pressing the engine switch. The power source mode changes in the following order every time the engine switch is pressed: off → on (ACC) → on (IG) → off.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    3. After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the engine switch is pressed while not depressing the clutch pedal, the power source mode changes to on (ACC) and "ACCESSORY" is displayed in the combination meter assembly.

      Text in Illustration
      *a
      		"ACCESSORY" Display


      4. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    4. After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the engine switch is pressed 2 times without depressing the clutch pedal, the power source mode changes to on (IG) and "IGNITION ON" is displayed in the combination meter assembly.

      Text in Illustration
      *a
      		"IGNITION ON" Display

    5. After getting into the vehicle while carrying the electrical key transmitter sub-assembly when the engine switch is off, if the clutch pedal is depressed while the key warning light is displayed in the combination meter assembly.



      6. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    6. The engine starts if the engine switch is pressed when the key warning light is displayed in the combination meter assembly.

      Text in Illustration
      *a
      		Key Warning Light Display


  3. Changing the power source mode when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion (for Automatic Transmission):

    1. Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.

    2. While depressing the brake pedal, while facing the logo side of the electrical key transmitter sub-assembly towards the engine switch, hold the electrical key transmitter sub-assembly near the engine switch.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    3. A buzzer sounds and "IGNITION ON" is displayed in the combination meter assembly, and the power source mode changes to on (IG).

      Text in Illustration
      *a
      		"IGNITION ON" Display

    4. Pressing the engine switch without depressing the brake pedal turns the power source mode from on (IG) to off.



  4. Changing the power source mode when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion (for Manual Transmission):

    1. Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.

    2. While depressing the clutch pedal, while facing the logo side of the electrical key transmitter sub-assembly towards the engine switch, hold the electrical key transmitter sub-assembly near the engine switch.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    3. A buzzer sounds and "IGNITION ON" is displayed in the combination meter assembly, and the power source mode changes to on (IG).

      Text in Illustration
      *a
      		"IGNITION ON" Display

    4. Pressing the engine switch without depressing the clutch pedal turns the power source mode from on (IG) to off.



  5. Starting the engine when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion (for Automatic Transmission):

    1. Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.

    2. While depressing the brake pedal with the shift lever in P or N*, while facing the logo side of the electrical key transmitter sub-assembly towards the engine switch, hold the electrical key transmitter sub-assembly near the engine switch.

      HINT:
      *: This is only applicable when the steering wheel is unlocked.


      3. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    3. A buzzer in the combination meter assembly will sound, the power source mode changes to on (IG) and the key warning light is displayed in the combination meter assembly.

      Text in Illustration
      *a
      		Key Warning Light Display

    4. Press the engine switch with the brake pedal depressed to start the engine.



  6. Starting the engine when the electrical key transmitter sub-assembly does not operate correctly due to wave interference or transmitter battery depletion (for Manual Transmission):

    1. Unlock the door using the built-in mechanical key and get into the vehicle while carrying the electrical key transmitter sub-assembly.

    2. While depressing the clutch pedal, facing the logo side of the electrical key transmitter subassembly towards the engine switch, hold the electrical key transmitter sub-assembly near the engine switch.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    3. A buzzer in the combination meter assembly will sound, the power source mode changes to on (IG) and the key warning light is displayed in the combination meter assembly.

      Text in Illustration
      *a
      		Key Warning Light Display

    4. Press the engine switch with the clutch pedal depressed to start the engine.


CHECK PUSH-BUTTON START FUNCTION


  1. Check the push-button start function (for Automatic Transmission):



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    1. Get into the vehicle while carrying the electrical key transmitter sub-assembly with the engine switch off. With the shift lever in P, check that the key warning light is displayed in the combination meter assembly when the brake pedal is depressed. Then check that the engine starts when the engine switch is pressed after the key warning light is displayed in the combination meter assembly.

      Text in Illustration
      *a
      		Key Warning Light Display

    2. While the brake pedal is released and the electrical key transmitter sub-assembly is being carried, check that the power source mode changes in the following order when the engine switch is pressed: off → on (ACC) → on (IG) → off.

      HINT:
      When the engine switch is pressed with the engine switch on (IG) and the shift lever not in P, the power source mode does not change to off, but changes to on (ACC).

    3. With the shift lever in P, check that the steering lock operates when a door is opened.

      HINT:
      When the engine switch is pressed after the vehicle is stopped, the engine stops and all the power turns off. However, if the shift lever is not in P when the engine switch is pressed with the vehicle stopped, the power source mode does not change to off, but changes to on (ACC).


      4. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    4. Check the push-button start function operation range for the front side. Place the electrical key transmitter sub-assembly in either of the two locations making sure that the electrical key transmitter sub-assembly is oriented as shown in the illustration, and then check that the engine can be started.

      Text in Illustration
      *a
      		Inspection Point
      HINT:
      Even if the electrical key transmitter sub-assembly is in a vehicle interior key detection area, the electrical key transmitter subassembly may not be properly detected if the electrical key transmitter sub-assembly is on the instrument panel, in a door pocket, in the glove box, on the floor or in a storage compartment.
      HINT:
      1. If the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the shift lever, communication may not be possible.
      2. Perform this inspection for both inspection points.


      5. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    5. Check the push-button start function operation range for the rear side. Place the electrical key transmitter sub-assembly in either of the two locations making sure that the electrical key transmitter sub-assembly is oriented as shown in the illustration, and then check that the engine can be started.

      Text in Illustration
      *a
      		Inspection Point
      HINT:
      Even if the electrical key transmitter sub-assembly is in a vehicle interior key detection area, the electrical key transmitter subassembly may not be properly detected if the electrical key transmitter sub-assembly is on the instrument panel, in a door pocket, in the glove box, on the floor or in a storage compartment.
      HINT:
      1. If the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the center of the rear seat, communication may not be possible.
      2. Perform this inspection for both inspection points.


      6. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    6. Check the push-button start function operation range for the luggage side. Place the electrical key transmitter sub-assembly at either inspection point so that it is facing the direction shown in the illustration, and then check that the engine can be started.

      Text in Illustration
      *a
      		Inspection Point
      HINT:
      Even if the electrical key transmitter subassembly is in a vehicle interior key detection area, the electrical key transmitter subassembly may not be properly detected if the electrical key transmitter sub-assembly is on the instrument panel, in the glove box or on the floor.
      HINT:
      1. If the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the center of the rear seat, communication may not be possible.
      2. Perform this inspection for both inspection points.


  2. Check the push-button start function (for Manual Transmission):



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    1. Get into the vehicle while carrying the electrical key transmitter sub-assembly. With the engine switch off, check that the key warning light is displayed in the combination meter assembly when the clutch pedal is depressed. Check that the engine starts when the engine switch is pressed with the key warning light is displayed in the combination meter assembly.

      Text in Illustration
      *a
      		Key Warning Light Display

    2. While the clutch pedal is released and the electrical key transmitter sub-assembly is being carried, check that the power source mode changes in the following order when the engine switch is pressed: off → on (ACC) → on (IG) → off.

    3. Check that the steering lock operates when a door is opened.



      4. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    4. Check the push-button start function operation range for the front side. Place the electrical key transmitter sub-assembly in either of the two locations making sure that the electrical key transmitter sub-assembly is oriented as shown in the illustration, and then check that the engine can be started.

      Text in Illustration
      *a
      		Inspection Point
      HINT:
      Even if the electrical key transmitter sub-assembly is within the vehicle interior detection area, the electrical key transmitter subassembly may not be properly detected if it is on the instrument panel, in a door pocket, in the glove box, on the floor or in a storage compartment.
      HINT:
      1. If the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the shift lever, communication may not be possible.
      2. Perform this inspection for both inspection points.


      5. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    5. Check the push-button start function operation range for the rear side. Place the electrical key transmitter sub-assembly in either of the two locations making sure that the electrical key transmitter sub-assembly is oriented as shown in the illustration, and then check that the engine can be started.

      Text in Illustration
      *a
      		Inspection Point
      HINT:
      Even if the electrical key transmitter sub-assembly is within the vehicle interior detection area, the electrical key transmitter subassembly may not be properly detected if it is on the instrument panel, in a door pocket, in the glove box, on the floor or in a storage compartment.
      HINT:
      1. If the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the center of the rear seat, communication may not be possible.
      2. Perform this inspection for both inspection points.


      6. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

    6. Check the push-button start function operation range for the luggage side. Place the electrical key transmitter sub-assembly at either inspection point so that it is facing the direction shown in the illustration, and then check that the engine can be started.

      Text in Illustration
      *a
      		Inspection Point
      HINT:
      Even if the electrical key transmitter subassembly is in a vehicle interior key detection area, the electrical key transmitter subassembly may not be properly detected if the electrical key transmitter sub-assembly is on the instrument panel, in the glove box or on the floor.
      HINT:
      1. If the electrical key transmitter sub-assembly is within 0.2 m (0.656 ft.) of the center of the rear seat, communication may not be possible.
      2. Perform this inspection for both inspection points.

CHECK TRANSMITTER BATTERY SAVING FUNCTION

  1. Check the transmitter battery saving function:

    1. Press the unlock switch of the electrical key transmitter sub-assembly twice while pressing the lock switch and check that the electrical key transmitter sub-assembly LED blinks 4 times and enters transmitter battery saving mode.

    2. Check that the entry and start system does not operate while in transmitter battery saving mode.

      HINT:
      To cancel transmitter battery saving mode, press a button of the electrical key transmitter sub-assembly.

CHECK POWER SOURCE MODE CHANGING FUNCTION

  1. Check the engine switch.

    1. Check that the power source mode changes according to the chart below.

      for Automatic Transmission:
      Shift Position
      		Brake Pedal
      		Power Source Mode when Engine Switch Pressed
      P
      		Released
      		Off → on (ACC) → on (IG) → off
      P
      		Released
      		Engine running → off
      P
      		Released
      		On (ACC)* → off
      P
      		Depressed
      		Off → engine starts
      P
      		Depressed
      		On (ACC) → engine starts
      P
      		Depressed
      		On (IG) → engine starts
      P
      		Depressed
      		Engine running → off
      P
      		Depressed
      		On (ACC)* → off
      N
      		Released
      		Off → on (ACC) → on (IG) (after power source mode changes to on (IG), power source mode changes between on (IG) and on (ACC) every time engine switch is pressed)
      N
      		Released
      		Engine running → on (ACC)
      N
      		Depressed
      		Off → engine starts
      N
      		Depressed
      		On (ACC) → engine starts
      N
      		Depressed
      		On (IG) → engine starts
      N
      		Depressed
      		Engine running → on (ACC)
      Not P or N
      		Released
      		Off → on (ACC) → on (IG) (after power source mode changes to on (IG), power source mode changes between on (IG) and on (ACC) every time engine switch is pressed)
      Not P or N
      		Released
      		Engine running → on (ACC)
      Not P or N
      		Depressed
      		Off → on (IG)
      Not P or N
      		Depressed
      		On (ACC) → on (IG)
      Not P or N
      		Depressed
      		Engine running → on (ACC)
      HINT:
      *: This situation is only applicable when the power source mode has changed from on (IG) to on (ACC). However, this situation is not applicable when an emergency stop is performed by pressing and holding the engine switch for 2 seconds or more or by quickly pressing the engine switch 3 times or more.

      for Manual Transmission:
      Clutch Pedal
      		Power Source Mode when Engine Switch Pressed
      Released
      		Off → on (ACC) → on (IG) → off
      Released
      		Engine running → off
      Depressed
      		Off → engine starts
      Depressed
      		On (ACC)* → engine starts
      Depressed
      		On (IG) → engine starts
      Depressed
      		Engine running → off
      HINT:
      *: This situation is only applicable when the power source mode has changed from on (IG) to on (ACC). However, this situation is not applicable when an emergency stop is performed by pressing and holding the engine switch for 2 seconds or more or by quickly pressing the engine switch 3 times or more.

CHECK POWER SOURCE MODE INDICATION


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

  1. Check the key warning (for Automatic Transmission).

    Text in Illustration
    *a
    		"ACCESSORY" Display
    *b
    		"IGNITION ON" Display
    *c
    		Key Warning Light Display
    Multi-information Display Inspection
    Power Source Mode
    		Multi-information Display
    Off
    (Excluding condition in which the engine can be started)
    		Off
    On (ACC)
    (Excluding condition in which the engine can be started)
    		"ACCESSORY" display
    On (IG)
    (Excluding condition in which the engine can be started)
    		"IGNITION ON" display
    Condition in which engine can be started*1
    		Key warning light display
    Engine started
    		Off
    HINT:
    *1: Indicates the condition in which the engine can be started by pressing the engine switch while either of the following conditions is met:
    1. Condition 1
      All of the following conditions are met:
      1. The power source mode was turned from on (IG) to on (ACC).
      2. Key verification is OK*2 or immobiliser is unset (engine switch is on (ACC) or on (IG)).
      3. The shift lever is in N and the steering is unlocked.
      4. The stop light switch is on.
    2. Condition 2
      All of the following conditions are met:
      1. The power source mode was not turned from on (IG) to on (ACC).
      2. Key verification is OK*2 or immobiliser is unset (engine switch is on (ACC) or on (IG)).
      3. The stop light switch is on.
      4. The shift lever is in P, or the shift lever is in N with the steering unlocked.
    *2: When the electrical key transmitter sub-assembly is in the cabin, the ID code sent as a result of communication between the electrical key transmitter sub-assembly and certification ECU (smart key ECU assembly) and the ID code calculated by the certification ECU (smart key ECU assembly) are compared. If the ID codes match each other, the vehicle recognizes that the electrical key transmitter sub-assembly is in the cabin.


    2. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Start Function) Operation Check

  2. Check the key warning (for Manual Transmission).

    Text in Illustration
    *a
    		"ACCESSORY" Display
    *b
    		"IGNITION ON" Display
    *c
    		Key Warning Light Display
    Multi-information Display Inspection
    Power Source Mode
    		Multi-information Display
    Off
    (Excluding condition in which the engine can be started)
    		Off
    On (ACC)
    (Excluding condition in which the engine can be started)
    		"ACCESSORY" display
    On (IG)
    (Excluding condition in which the engine can be started)
    		"IGNITION ON" display
    Condition in which engine can be started*1
    		Key warning light display
    Engine started
    		Off
    HINT:
    *1: Indicates the condition in which the engine can be started by pressing the engine switch while either of the following conditions is met:
    1. Condition 1
      All of the following conditions are met:
      1. The key is verified*2 or the immobiliser is unset (engine switch on (ACC) or on (IG)).
      2. The clutch start switch is on.
    *2: When the electrical key transmitter sub-assembly is in the vehicle, the ID code sent as a result from communication between the electrical key transmitter subassembly and certification ECU (smart key ECU assembly) and the ID code calculated by the certification ECU (smart key ECU assembly) are compared. If the ID codes match each other, the vehicle recognizes that the electrical key transmitter sub-assembly is in the vehicle.