Entry And Start System (For Entry Function) Customize Parameters

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

  1. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)

  1. ENTRY UNLOCK MODE SWITCHING FUNCTION

  1. KEY CANCEL

  1. WIRELESS BUZZER VOLUME ADJUSTMENT .

Entry And Start System (For Entry Function) -- Customize Parameters



CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current setting before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Entry & Start
    Display
    		Default
    		Contents
    		Setting
    Ignition Area
    (Entry ignition available area)
    		ALL
    		Function to choose the available area for the key to start the engine and cancel the steering lock.
    		FRONT/ALL*
    Park Wait Time (Waiting time to permit unlocking door after locking)
    		2.5s
    		Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function.
    		0.5s/1.5s/2.5s/5s
    Back Door Opening Operation (Back door open mode when vehicle is locked)
    		LONG
    		Back door opening the operation.
    		LONG/TWICE/OFF

    Warning
    Display
    		Default
    		Contents
    		Setting
    Passenger Take Key
    		ON
    		Warn a key is taken out by fellow passengers
    		ON/OFF
    Key Low Battery Warning (Warn when key battery becomes weak)
    		ON
    		Function that warns the driver that the key battery power is low.
    		ON/OFF
    Key Out Range Warning
    		ON
    		Warn Starting E/G when the key is out of range
    		ON/OFF
    HINT:
    *: "FRONT" means front, and "ALL" means front, rear 1 and rear 2.

    PSD & PBD Operation (w/ Power Back Door System)
    Display
    		Default
    		Contents
    		Setting
    Wireless PBD Operation
    		0.8 s
    (1Motion)*
    		Function that operates power back door when door control transmitter is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or off).
    (Function to turn on/off the power back door wireless one motion open operation.)*
    		1 Oper or 2 Oper or 0.8 s or OFF
    (1Motion or 1 Oper or 2 Oper or 0.8 s or OFF)*
    HINT:
    *: Except Europe

CUSTOMIZING FUNCTION WITH MULTI-DISPLAY (w/ Multi-display)
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current setting before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Turn the engine switch on (IG).

  2. Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Door Lock Settings.

  3. Select the setting by referring to the table below.

    Door lock settings
    Display
    		Default
    		Contents
    		Setting
    Select Doors to Unlock
    		All Doors
    		Function that sets which doors are unlocked by the entry unlock function.
    		All Doors or Driver's Door
    Entry and start system
    		ON
    		Function that enables or disables the entry and start system.
    		On or Off

ENTRY UNLOCK MODE SWITCHING FUNCTION

  1. To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds.

    1. When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.
    NOTICE:
    After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.
    1. All door unlock mode (default):
      When a touch sensor is touched, all doors unlock.
    2. Driver door unlock mode:
      When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.

  2. The certification ECU (smart key ECU assembly) receives this signal from the door control receiver and changes the entry and start system to the entry unlock mode.



    3. Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Entry Function) Customize Parameters

  3. The certification ECU (smart key ECU assembly) sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.

    HINT:
    The function only changes the entry unlock mode of the entry and start system. It does not switch the unlocking of the wireless door lock control.

    1. All door unlock mode:


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Entry Function) Customize Parameters

      HINT:
      1. *1: except China.
      2. *2: For vehicles with the multi-information display.

    2. Driver door unlock mode:


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Theft Deterrent Keyless Entry.Entry And Start System (For Entry Function).Entry And Start System (For Entry Function) Customize Parameters

      HINT:
      1. *1: except China.
      2. *2: For vehicles with the multi-information display.
      3. The above illustration is for LHD vehicles. For RHD vehicles, the left side and right side are reversed.

KEY CANCEL
The key cancel operation disables the following functions:
  1. Entry Unlock/Lock
  2. Key Lock-in Prevention
  3. Memory Call
  4. Entry Back Door Open
  5. Warning
  6. Entry Ignition

  1. The operation procedures are as follows:
    Precondition:
    Engine switch off, driver side door closed and unlocked.

    1. Unlock the driver side door once with the unlock switch of the key.

    2. Open the driver door within 5 seconds.

    3. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.

    4. Perform close → open twice for the driver door within 30 seconds.
      (Driver door: Open condition → Close → Open → Close → Open)

    5. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.

    6. Perform close → open once for the driver door within 30 seconds.
      (Driver door: Open condition → Close → Open)

    7. Close the driver door within 5 seconds.
      When key cancel is activated, the wireless door lock buzzer sounds twice.
      To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.


WIRELESS BUZZER VOLUME ADJUSTMENT (Click here).