INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)
INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)
INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)
Door Control Receiver -- Installation |
| 1. INSTALL DOOR CONTROL RECEIVER |
Install the receiver with the bolt.
- Torque:
- 15 N*m{153 kgf*cm, 11 ft.*lbf}
 |
Connect the connector.
| 2. INSTALL REAR UPPER PILLAR GARNISH RH |
 |
w/o Power Back Door:
Attach the 5 clips to install the rear upper pillar garnish RH.
w/ Power Back Door:
Pass the power back door rod through the rear upper pillar garnish RH.
Text in Illustration *a Power Back Door Rod Attach the 5 clips to install the rear upper pillar garnish RH.
 |
Install the seat belt shoulder anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
 |
Attach the 2 claws to close the seat belt shoulder anchor cover.
 |
| 3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH |
 |
- HINT:
- When installing the front quarter trim panel assembly RH, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.
w/ Rear No. 2 Seat, except Face to Face Seat Type:
w/o Rear Air Conditioning System:
Connect the rear seat lock control lever cable.w/ Rear Air Conditioning System:
Connect the thermistor connector and rear seat lock control lever cable.Attach the 16 clips and 2 claws to install the front quarter trim panel assembly RH.
Install the clip and bolt.
- Torque:
- 12 N*m{122 kgf*cm, 9 ft.*lbf}
w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:
Attach the 16 clips and 2 claws to install the front quarter trim panel assembly RH.
Install the clip.
w/ Rear No. 2 Seat, except Face to Face Seat Type:
Install the rear No. 2 seat belt anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Attach the 3 claws to install the outer lap belt anchor cover.
 |
Install the rear No. 1 seat belt anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
 |
Attach the 3 claws to install the outer lap belt anchor cover.
 |
| 4. INSTALL REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type) |
- HINT:
- Use the same procedure for rear seat cover caps.
Attach the 3 claws to install the rear seat cover cap.
 |
| 5. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover) |
- HINT:
- Use the same procedure for No. 1 tonneau cover holder caps.
Attach the 2 claws to install the No. 1 tonneau cover holder cap.
 |
| 6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE |
 |
Attach the 6 clips to install the rear floor mat support plate.
| 7. INSTALL REAR DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedures described for the LH side.
| 8. INSTALL REAR STEP COVER |
- HINT:
- Use the same procedure for both rear step covers.
Attach the 2 claws to install the rear step cover.
 |
| 9. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type) |
Install the rear No. 2 seat assembly RH (Click here).
| 10. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type) |
Install the rear No. 2 seat assembly RH (Click here).