Network Gateway Ecu (For Lhd) Removal

Power Source Network. Land Cruiser. Urj200, 202 Grj200 Vdj200
Networking. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION

  4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

  5. REMOVE INSTRUMENT SIDE PANEL RH

  6. REMOVE FRONT DOOR SCUFF PLATE RH

  7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  8. REMOVE COWL SIDE TRIM BOARD RH

  9. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

  10. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  11. REMOVE INSTRUMENT PANEL BOX DOOR KNOB

  12. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

  13. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY

  14. REMOVE COWL SIDE JUNCTION BLOCK RH

  15. REMOVE NETWORK GATEWAY ECU

Network Gateway Ecu (For Lhd) -- Removal



1. PRECAUTION
NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION


  1. for Type A:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Network Gateway Ecu (For Lhd) Removal

    1. Put protective tape around the No. 1 instrument panel finish panel cushion.

      Text in Illustration
      *a
      		Protective Tape

    2. Using a moulding remover B, detach the 4 claws and 3 clips and remove the No. 2 instrument panel finish panel cushion.



  1. for Type B:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Network Gateway Ecu (For Lhd) Removal

    1. Put protective tape around the No. 1 instrument panel finish panel cushion.

      Text in Illustration
      *a
      		Protective Tape

    2. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.



4. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


  1. for Type A:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Network Gateway Ecu (For Lhd) Removal

    1. Put protective tape around the lower instrument panel pad sub-assembly RH.

      Text in Illustration
      *a
      		Protective Tape

    2. Remove the clip and screw.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200

    3. Detach the 11 claws and guide and remove the lower instrument panel pad sub-assembly RH.



  1. for Type B:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Network Gateway Ecu (For Lhd) Removal

    1. Put protective tape around the lower instrument panel pad sub-assembly RH.

      Text in Illustration
      *a
      		Protective Tape

    2. Remove the clip and screw.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200

    3. Detach the 7 claws and remove the lower instrument panel pad sub-assembly RH.



5. REMOVE INSTRUMENT SIDE PANEL RH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Network Gateway Ecu (For Lhd) Removal

  1. Put protective tape around the instrument side panel RH.

    Text in Illustration
    *a
    		Protective Tape

  1. Using a moulding remover A, detach the 6 claws and remove the instrument side panel RH.

  1. w/ Airbag Cut Off Switch:

    1. Disconnect the connector and remove the instrument side panel RH.



6. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and 3 guides.

  1. Disconnect the connector and remove the No. 2 instrument panel under cover sub-assembly.



8. REMOVE COWL SIDE TRIM BOARD RH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Network Gateway Ecu (For Lhd) Removal

  1. Remove the cap nut.

    Text in Illustration
    *a
    		Cap Nut

  1. Detach the 2 clips and remove the cowl side trim board LH.



9. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Network Gateway Ecu (For Lhd) Removal

  1. Remove the 4 bolts.

  1. Detach the 4 claws and remove the front passenger side knee airbag assembly.

  1. Using a screwdriver, release the connector lock and disconnect the airbag connector.

    Text in Illustration
    *a
    		Connector Lock
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Protective Tape
    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.
    CAUTION:
    Tape the screwdriver tip before use.


10. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Network Gateway Ecu (For Lhd) Removal

  1. Put protective tape around the No. 3 instrument cluster finish panel garnish.

    Text in Illustration
    *a
    		Protective Tape

  1. Using a moulding remover A, detach the 6 claws and remove the No. 3 instrument cluster finish panel garnish.



11. REMOVE INSTRUMENT PANEL BOX DOOR KNOB
HINT:
Use the same procedure for both instrument panel box door knobs.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a moulding remover B, detach the 2 claws and remove the instrument panel box door knob.



12. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Network Gateway Ecu (For Lhd) Removal

  1. Put protective tape around the lower No. 2 instrument panel finish panel.

  1. Remove the 4 screws <C>.

    Text in Illustration
    *a
    		Protective Tape
    *b
    		Screw <C>


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws.

  1. Disconnect the connector and remove the lower No. 2 instrument panel finish panel.



13. REMOVE WINDSHIELD WIPER RELAY ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the connector.

  1. Remove the screw.

  1. Detach the 2 guides and remove the windshield wiper relay assembly



14. REMOVE COWL SIDE JUNCTION BLOCK RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the 5 connectors.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw and 2 nuts and pull out the cowl side junction block RH.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the back side of the wire harness clamp and disconnect the 2 connectors.



15. REMOVE NETWORK GATEWAY ECU


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and network gateway ECU.