Ultrasonic Sensor (For Rear) Installation

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER

  2. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER

  3. INSTALL NO. 1 ULTRASONIC SENSOR

  4. INSTALL NO. 2 FRAME WIRE

  5. INSTALL REAR BUMPER COVER

Ultrasonic Sensor (For Rear) -- Installation



1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER
HINT:
Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System.Ultrasonic Sensor (For Rear) Installation

  1. Align the keyhole and protrusion as shown in the illustration.

    Text in Illustration
    *a
    		Protrusion
    *b
    		Keyhole
    NOTICE:
    1. Do not damage the bumper with the protrusion when installing the No. 1 ultrasonic sensor retainer.
    2. Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.
    HINT:
    The illustration shows the No. 1 ultrasonic sensor retainer for the RH corner. The vertical orientation of the No. 1 ultrasonic sensor retainers for the LH corner is opposite that of the image shown in the illustration.

  1. Attach the 2 claws to install the No. 1 ultrasonic sensor retainer.



2. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
HINT:
Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System.Ultrasonic Sensor (For Rear) Installation

  1. Align the keyhole and protrusion as shown in the illustration.

    Text in Illustration
    *a
    		Protrusion
    *b
    		Keyhole
    NOTICE:
    1. Do not damage the bumper with the protrusion when installing the No. 2 ultrasonic sensor retainer.
    2. Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the rear bumper.

  1. Attach the 2 claws to install the No. 2 ultrasonic sensor retainer.



3. INSTALL NO. 1 ULTRASONIC SENSOR
HINT:
Use the same procedure for all No. 1 ultrasonic sensors.

  1. Attach the 2 claws to install the No. 1 ultrasonic sensor.

    NOTICE:
    Push the ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.


4. INSTALL NO. 2 FRAME WIRE

  1. for Standard:
    (Click here).

  1. w/ Towing Hitch:
    (Click here).

  1. w/ Pintle Hook:
    (Click here).



5. INSTALL REAR BUMPER COVER

  1. for Standard:
    (Click here).

  1. w/ Towing Hitch:
    (Click here).

  1. w/ Pintle Hook:
    (Click here).