Dtc C1694 Steering Angle Initialization Incomplete

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

PERFORM SETTINGS

CHECK FOR DTC

DTC C1694 Steering Angle Initialization Incomplete


DESCRIPTION

This DTC is stored when the parking assist ECU judges that the maximum steering angle has not been memorized (steering angle setting is incomplete).

DTC Code
DTC Detection Condition
Trouble Area
C1694
Maximum steering angle has not been memorized
  1. Steering angle setting
  2. Parking assist ECU

INSPECTION PROCEDURE

NOTICE:
  1. When "!" mark is displayed on the multi-display after disconnecting the cable from the negative (-) battery terminal, correct the steering angle neutral point (Click here).
  2. Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the multi-terrain monitor system may be needed (Click here).
1.PERFORM SETTINGS

  1. Perform the following procedure depending on the memory conditions to register the vehicle information into the parking assist ECU.

    1. Refer to steering angle setting (Click here).


NEXT


2.CHECK FOR DTC

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC C1694 is not output.
    HINT:
    1. If DTC C1694 is output, perform the steering angle setting again.
    1. If DTC C1694 is still output after performing the steering angle setting 3 times, replace the parking assist ECU.


NG
REPLACE PARKING ASSIST ECU (Click here)
OK

END (SETTINGS ARE DEFECTIVE)