Dtc U0265 Lost Communication With Image Processing Sensor A

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK FOR DTC

CHECK CAN BUS WIRE (PARKING ASSIST ECU)

CONNECT CONNECTOR

CHECK CAN BUS WIRE (CAN JUNCTION TERMINAL)

CONNECT CONNECTOR

CHECK CAN BUS WIRE (NO. 8 CAN JUNCTION CONNECTOR)

CONNECT CONNECTOR

CHECK CAN BUS WIRE (NO. 10 CAN JUNCTION CONNECTOR)

CHECK FOR DTC

CHECK CAN BUS WIRE (NO. 10 CAN JUNCTION CONNECTOR - REAR TELEVISION CAMERA ASSEMBLY)

CONNECT CONNECTOR

CHECK CAN BUS WIRE (REAR TELEVISION CAMERA ASSEMBLY - NO. 10 CAN JUNCTION CONNECTOR)

CHECK CAN BUS WIRE (NO. 8 CAN JUNCTION CONNECTOR - SIDE TELEVISION CAMERA ASSEMBLY RH)

CONNECT CONNECTOR

CHECK CAN BUS WIRE (SIDE TELEVISION CAMERA ASSEMBLY RH - NO. 8 CAN JUNCTION CONNECTOR)

CHECK CAN BUS WIRE (NO. 8 CAN JUNCTION CONNECTOR - FRONT TELEVISION CAMERA ASSEMBLY)

CONNECT CONNECTOR

CHECK CAN BUS WIRE (FRONT TELEVISION CAMERA ASSEMBLY - NO. 8 CAN JUNCTION CONNECTOR)

CHECK CAN BUS WIRE (NO. 8 CAN JUNCTION CONNECTOR - SIDE TELEVISION CAMERA ASSEMBLY LH)

CONNECT CONNECTOR

CHECK CAN BUS WIRE (SIDE TELEVISION CAMERA ASSEMBLY LH - NO. 8 CAN JUNCTION CONNECTOR)

DTC U0265 Lost Communication with Image Processing Sensor A

DTC U0266 Lost Communication with Image Processing Sensor B

DTC U0267 Lost Communication with Image Processing Sensor C

DTC U0268 Lost Communication with Image Processing Sensor D


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
U0265
Lost Communication with rear television camera assembly
  1. Parking assist ECU
  2. Rear television camera assembly
  3. CAN junction connector
  4. CAN junction terminal
  5. CAN main wire or connector
  6. CAN branch wire or connector
U0266
Lost Communication with side television camera assembly LH
  1. Parking assist ECU
  2. Side television camera assembly LH
  3. CAN junction connector
  4. CAN junction terminal
  5. CAN main wire or connector
  6. CAN branch wire or connector
U0267
Lost Communication with front television camera assembly
  1. Parking assist ECU
  2. Front television camera assembly
  3. CAN junction connector
  4. CAN junction terminal
  5. CAN main wire or connector
  6. CAN branch wire or connector
U0268
Lost Communication with side television camera assembly RH
  1. Parking assist ECU
  2. Side television camera assembly RH
  3. CAN junction connector
  4. CAN junction terminal
  5. CAN main wire or connector
  6. CAN branch wire or connector

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System. Dtc U0265 Lost Communication With Image Processing Sensor A


INSPECTION PROCEDURE

NOTICE:
  1. Before measuring the resistance of the CAN bus, turn the engine switch off and leave the vehicle for 1 minute or more without operating the key, switches or opening or closing the doors. After that, disconnect the cable from the negative (-) battery terminal and leave the vehicle for 1 minute or more before measuring the resistance.
  2. After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
HINT:
  1. Operating the engine switch, any other switches or a door triggers related ECU and sensor communication on the CAN. This communication will cause the resistance value to change.
  2. Even after DTCs are cleared, if a DTC is stored again after driving the vehicle for a while, the malfunction may be occurring due to vibration of the vehicle. In such a case, wiggling the ECUs or wire harness while performing the inspection below may help determine the cause of the malfunction.
1.CHECK FOR DTC

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    Result
    Result
    		Proceed to
    DTC U0265, U0266, U0267 and U0268 are not output
    		A
    DTC U0265, U0266, U0267 and U0268 are output
    		B
    DTC U0265, U0266, U0267 or U0268 are output
    		C


B
Go to step 2

C
Go to step 9
A

USE SIMULATION METHOD TO CHECK (Click here)

2.CHECK CAN BUS WIRE (PARKING ASSIST ECU)

  1. Disconnect the parking assist ECU connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    F76-21 (CANH) - F76-20 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		108 to 132 Ω
    F76-21 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    F76-20 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    F76-21 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    F76-20 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher


NG
Go to step 3
OK

REPLACE PARKING ASSIST ECU (Click here)

3.CONNECT CONNECTOR

  1. Reconnect the F76 parking assist ECU connector.


NEXT


4.CHECK CAN BUS WIRE (CAN JUNCTION TERMINAL)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System. Dtc U0265 Lost Communication With Image Processing Sensor A

  1. Disconnect the CAN junction terminal connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    K51-3 (CANH) - K51-2 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		108 to 132 Ω
    K51-3 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    K51-2 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    K51-3 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    K51-2 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    Text in Illustration
    *a
    		Rear view of harness connector
    (to CAN Junction Terminal)
    *b
    		Front view of DLC3


NG
Go to step 5
OK

REPLACE CAN JUNCTION TERMINAL

5.CONNECT CONNECTOR

  1. Reconnect the K51 CAN junction terminal connector.


NEXT


6.CHECK CAN BUS WIRE (NO. 8 CAN JUNCTION CONNECTOR)


  1. Disconnect the No. 8 CAN junction connector.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System. Dtc U0265 Lost Communication With Image Processing Sensor A


    Text in Illustration
    *a
    		Front view of wire harness connector
    (to No. 8 CAN Junction Connector)
    		*b
    		Front view of DLC3
    *c
    		Parking Assist ECU
    		*d
    		No. 10 CAN Junction Connector

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    		Connect to
    E153-1 (CANH) - E153-11 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		108 to 132 Ω
    		Parking Assist ECU
    E153-1 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-11 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-1 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    E153-11 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    E153-3 (CANH) - E153-13 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		108 to 132 Ω
    		No. 10 CAN Junction Connector
    E153-3 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-13 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-3 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    E153-13 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    Result
    Result
    		Proceed to
    OK
    		A
    NG (to parking assist ECU CAN main wire)
    		B
    NG (to No. 10 CAN junction connector CAN main wire)
    		C


B
REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (NO. 8 CAN JUNCTION CONNECTOR - PARKING ASSIST ECU)

C
Go to step 7
A

REPLACE NO. 8 CAN JUNCTION CONNECTOR

7.CONNECT CONNECTOR

  1. Reconnect the E153 No. 8 CAN junction connector.


NEXT


8.CHECK CAN BUS WIRE (NO. 10 CAN JUNCTION CONNECTOR)
HINT:
Connectors that connect to the CAN junction connector can be distinguished by color of their CAN bus lines. When the connectors have been disconnected from the CAN junction connector, reconnecting the connectors to non-original positions on the CAN junction connector does not affect system performance. However, it is preferred to reconnect the connectors to their original positions to avoid negative effects on the wiring such as tension on the wiring harnesses, and to make future maintenance easier.


  1. Disconnect the No. 10 CAN junction connector.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System. Dtc U0265 Lost Communication With Image Processing Sensor A


    Text in Illustration
    *1
    		No. 10 CAN Junction Connector
    		-
    		-
    *a
    		Rear view of wire harness connector
    (to No. 10 CAN Junction Connector)
    		*b
    		Front view of DLC3

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    		Connect to
    K54-1 (CANH) - K54-2 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		108 to 132 Ω
    		No. 8 Junction Connector
    K54-1 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    K54-2 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    K54-1 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    K54-2 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    K55-1 (CANH) - K55-2 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		108 to 132 Ω
    		CAN Junction Terminal
    K55-1 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    K55-2 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    K55-1 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    K55-2 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    Result
    Result
    		Proceed to
    OK
    		A
    NG (to No. 8 CAN junction connector CAN main wire)
    		B
    NG (to CAN junction terminal CAN main wire)
    		C


B
REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (NO. 10 CAN JUNCTION CONNECTOR - NO. 8 CAN JUNCTION CONNECTOR)

C
REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (NO. 10 CAN JUNCTION CONNECTOR - CAN JUNCTION TERMINAL)
A

REPLACE NO. 10 CAN JUNCTION CONNECTOR

9.CHECK FOR DTC

  1. Which the DTCs have been output from.

    Result
    Result
    		Proceed to
    DTC U0265 is output
    		A
    DTC U0266 is output
    		B
    DTC U0267 is output
    		C
    DTC U0268 is output
    		D


B
Go to step 13

C
Go to step 16

D
Go to step 19
A


10.CHECK CAN BUS WIRE (NO. 10 CAN JUNCTION CONNECTOR - REAR TELEVISION CAMERA ASSEMBLY)
HINT:
Connectors that connect to the CAN junction connector can be distinguished by color of their CAN bus lines. When the connectors have been disconnected from the CAN junction connector, reconnecting the connectors to non-original positions on the CAN junction connector does not affect system performance. However, it is preferred to reconnect the connectors to their original positions to avoid negative effects on the wiring such as tension on the wiring harnesses, and to make future maintenance easier.


  1. Disconnect the No. 10 CAN junction connector.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System. Dtc U0265 Lost Communication With Image Processing Sensor A


    Text in Illustration
    *1
    		No. 10 CAN Junction Connector
    		-
    		-
    *a
    		Rear view of wire harness connector
    (to No. 10 CAN Junction Connector)
    		*b
    		Front view of DLC3

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    K53-1 (CANH) - K53-2 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    K53-1 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    K53-2 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    K53-1 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    K53-2 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher


NG
Go to step 11
OK

REPLACE NO. 10 CAN JUNCTION CONNECTOR

11.CONNECT CONNECTOR

  1. Reconnect the K53 No. 10 CAN junction connector.


NEXT


12.CHECK CAN BUS WIRE (REAR TELEVISION CAMERA ASSEMBLY - NO. 10 CAN JUNCTION CONNECTOR)

  1. Disconnect the rear television camera assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    S30-4 (CANH) - S30-1 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		54 to 69 Ω
    S30-4 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    S30-1 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    S30-4 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    S30-1 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher


NG
REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (REAR TELEVISION CAMERA ASSEMBLY - NO. 10 CAN JUNCTION CONNECTOR)
OK

REPLACE REAR TELEVISION CAMERA ASSEMBLY (Click here)

13.CHECK CAN BUS WIRE (NO. 8 CAN JUNCTION CONNECTOR - SIDE TELEVISION CAMERA ASSEMBLY RH)


  1. Disconnect the No. 8 CAN junction connector.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System. Dtc U0265 Lost Communication With Image Processing Sensor A


    Text in Illustration
    *a
    		Front view of wire harness connector
    (to No. 8 CAN Junction Connector)
    		*b
    		Front view of DLC3

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E153-5 (CANH) - E153-15 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-5 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-15 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-5 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    E153-15 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher


NG
Go to step 14
OK

REPLACE NO. 8 CAN JUNCTION CONNECTOR

14.CONNECT CONNECTOR

  1. Reconnect the E153 No. 8 CAN junction connector.


NEXT


15.CHECK CAN BUS WIRE (SIDE TELEVISION CAMERA ASSEMBLY RH - NO. 8 CAN JUNCTION CONNECTOR)

  1. Disconnect the side television camera assembly RH connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    I32-3 (CANH) - I32-14 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		54 to 69 Ω
    I32-3 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    I32-14 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    I32-3 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    I32-14 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher


NG
REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (SIDE TELEVISION CAMERA ASSEMBLY RH - NO. 8 CAN JUNCTION CONNECTOR)
OK

REPLACE SIDE TELEVISION CAMERA ASSEMBLY RH (Click here)

16.CHECK CAN BUS WIRE (NO. 8 CAN JUNCTION CONNECTOR - FRONT TELEVISION CAMERA ASSEMBLY)


  1. Disconnect the No. 8 CAN junction connector.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System. Dtc U0265 Lost Communication With Image Processing Sensor A


    Text in Illustration
    *a
    		Front view of wire harness connector
    (to No. 8 CAN Junction Connector)
    		*b
    		Front view of DLC3

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E153-2 (CANH) - E153-12 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-2 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-12 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-2 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    E153-12 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher


NG
Go to step 17
OK

REPLACE NO. 8 CAN JUNCTION CONNECTOR

17.CONNECT CONNECTOR

  1. Reconnect the E153 No. 8 CAN junction connector.


NEXT


18.CHECK CAN BUS WIRE (FRONT TELEVISION CAMERA ASSEMBLY - NO. 8 CAN JUNCTION CONNECTOR)

  1. Disconnect the front television camera assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A71-4 (CANH) - A71-1 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		54 to 69 Ω
    A71-4 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    A71-1 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    A71-4 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    A71-1 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher


NG
REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (FRONT TELEVISION CAMERA ASSEMBLY - NO. 8 CAN JUNCTION CONNECTOR)
OK

REPLACE FRONT TELEVISION CAMERA ASSEMBLY (Click here)

19.CHECK CAN BUS WIRE (NO. 8 CAN JUNCTION CONNECTOR - SIDE TELEVISION CAMERA ASSEMBLY LH)


  1. Disconnect the No. 8 CAN junction connector.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System. Dtc U0265 Lost Communication With Image Processing Sensor A


    Text in Illustration
    *a
    		Front view of wire harness connector
    (to No. 8 CAN Junction Connector)
    		*b
    		Front view of DLC3

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    E153-4 (CANH) - E153-14 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-4 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-14 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    E153-4 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    E153-14 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher


NG
Go to step 20
OK

REPLACE NO. 8 CAN JUNCTION CONNECTOR

20.CONNECT CONNECTOR

  1. Reconnect the No. 8 CAN junction connector.


NEXT


21.CHECK CAN BUS WIRE (SIDE TELEVISION CAMERA ASSEMBLY LH - NO. 8 CAN JUNCTION CONNECTOR)

  1. Disconnect the side television camera assembly LH connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    I35-3 (CANH) - I35-14 (CANL)
    		Cable disconnected from negative (-) battery terminal
    		108 to 132 Ω
    I35-3 (CANH) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    I35-14 (CANL) - E22-4 (CG)
    		Cable disconnected from negative (-) battery terminal
    		200 Ω or higher
    I35-3 (CANH) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher
    I35-14 (CANL) - E22-16 (BAT)
    		Cable disconnected from negative (-) battery terminal
    		6 kΩ or higher


NG
REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (SIDE TELEVISION CAMERA ASSEMBLY LH - NO. 8 CAN JUNCTION CONNECTOR)
OK

REPLACE SIDE TELEVISION CAMERA ASSEMBLY LH (Click here)