Dtc C168D Vehicle Information Unmatched

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

PERFORM SETTINGS

CHECK FOR DTC

DTC C168D Vehicle Information Unmatched


DESCRIPTION

This DTC is stored if the parking assist ECU judges as a result of its self check that the vehicle information received via CAN communication and the vehicle information stored in the parking assist ECU do not match.

DTC Code
DTC Detection Condition
Trouble Area
C168D
Vehicle Information Unmatched
  1. Camera position setting
  2. Steering angle setting
  3. Parking assist ECU

INSPECTION PROCEDURE

NOTICE:
  1. When "!" mark is displayed on the multi-display after the battery terminal disconnected, correct the steering angle neutral point (Click here).
  2. Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the multi-terrain monitor system may be needed (Click here).
1.PERFORM SETTINGS

  1. Perform the following procedure depending on the memory conditions to register the vehicle information into the parking assist ECU.

    1. Refer to camera position setting (Click here).

    2. Refer to steering angle setting (Click here).


NEXT


2.CHECK FOR DTC

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC C168D is not output.
    HINT:
    1. If DTC C168D is output, perform the procedure to allow the parking assist ECU to store the vehicle information again.
    2. If DTC C168D is still output after performing the procedure to make the parking assist ECU store the vehicle information 3 times, replace the parking assist ECU.


NG
REPLACE PARKING ASSIST ECU (Click here)
OK

END (SETTINGS ARE DEFECTIVE)