Blind Spot Monitor System Customize Parameters

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CUSTOMIZE BLIND SPOT MONITOR SYSTEM

Blind Spot Monitor System -- Customize Parameters



1. CUSTOMIZE BLIND SPOT MONITOR SYSTEM
HINT:
The following items can be customized.
NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Customizing with the GTS.

    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the blind spot monitor main switch (steering pad switch assembly [multi-function switch]) on.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Utility / Warning.

    6. Select the setting by referring to the table below.

      Warning
      Display
      		Default
      		Content
      		Setting
      		Relevant ECU
      BSM Buzzer Volume Adjust*
      		Medium
      		Function to adjust the buzzer volume of blind spot monitor buzzer.
      		Low, Medium or Hight
      		Blind Spot Monitor Sensor LH
      BSM Mirror Indicator Brightness
      		Bright
      		This item sets brightness level of outer rear view mirror indicator.
      		Bright or Dark
      		Blind Spot Monitor Sensor LH
      RCTA Function*
      		ON
      		Switches the RCTA function on and off.
      		ON or OFF
      		Blind Spot Monitor Sensor LH
      BSM Approaching Vehicle Detection Timing Setting
      		Middle
      		Sets the notification timing for vehicles approaching from behind the vehicle.
      		Only Blind Spot, Late, Middle or Early
      		Blind Spot Monitor Sensor LH

      1. *: w/ RCTA