Dtc U0126 Lost Communication With Steering Angle Sensor Module
DESCRIPTION
INSPECTION PROCEDURE
CHECK DTC OUTPUT
DTC U0126 Lost Communication with Steering Angle Sensor Module |
DTC U0130 Lost Communication with VGRS |
DTC U0140 Lost Communication with Body Control Module |
DESCRIPTION
These DTCs are stored if there is a malfunction in the CAN communication system connected to the rear television camera assembly.- HINT:
- If CAN communication system DTCs are stored, they may also be stored in other systems.
DTC Code
| Detection Item
| DTC Detection Condition
| Trouble Area
|
U0126
| Lost Communication with Steering Angle Sensor Module
| Lost communication with spiral with sensor cable sub-assembly
| CAN communication system
|
U0130
| Lost Communication with VGRS
| Lost communication with front steering control ECU*
| CAN communication system
|
U0140
| Lost Communication with Body Control Module
| Lost communication with main body ECU (multiplex network body ECU)
| CAN communication system
|
- *: w/ Variable Gear Ratio Steering System
INSPECTION PROCEDURE
Clear the DTCs (Click here).
Recheck for DTCs and check that no DTCs are output (Click here).
- HINT:
- If CAN communication system DTCs are stored, they may also be stored in other systems.
- If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
- If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs (Click here).
ResultResult
| Proceed to
|
No DTCs are output
| A
|
DTC U0126, U0130, and/or U0140 are output (for LHD)
| B
|
DTC U0126, U0130, and/or U0140 are output (for RHD)
| C
|