Window Glass Antenna Wire Repair

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT WINDOW GLASS ANTENNA WIRE

  2. REPAIR WINDOW GLASS ANTENNA WIRE

Window Glass Antenna Wire -- Repair



1. INSPECT WINDOW GLASS ANTENNA WIRE


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Window Glass Antenna Wire Repair
NOTICE:
When cleaning the glass, use a soft, dry cloth, and wipe the glass in the direction of the wire. Take care not to damage the wires. Do not use detergents or glass cleaners with abrasive ingredients. When measuring voltage, wind a piece of tin foil around the top of the probe and press the foil against the wire with your finger, as shown in the illustration.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Check the voltage at the center of each wire, as shown in the illustration.



2. REPAIR WINDOW GLASS ANTENNA WIRE


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Window Glass Antenna Wire Repair

  1. Clean the broken wire tips with grease, wax and silicone remover.

  1. Place masking tape along both sides of the wire to be repaired.

  1. Thoroughly mix the repair agent (DuPont paste No. 4817).



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Window Glass Antenna Wire Repair

  1. Using a fine tip brush, apply a small amount of the repair agent to the wire.

  1. After a few minutes, remove the masking tape.

    NOTICE:
    Do not allow electricity to flow in the antenna wire for at least 24 hours.