Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200
Rear Seat Entertainment Ecu -- Installation |
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1. INSTALL NO. 1 NAVIGATION WIRE |
Attach the clamps to install the No. 1 navigation wire.
Text in Illustration *A w/ DCM(Telematics Transceiver) - -
Connect the connector.
| 2. INSTALL FRONT CONSOLE BOX |
w/o Cool Box (Click here)
| 3. INSTALL NO. 3 MULTI-DISPLAY CONTROLLER BRACKET |
Install the bracket with the 2 bolts.
| 4. INSTALL NO. 2 MULTI-DISPLAY CONTROLLER BRACKET |
Install the bracket with the 2 bolts.
| 5. INSTALL MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY |
Install the multi-display controller sub-assembly with the 3 bolts.
Attach the clamps and connect the connectors.
| 6. INSTALL FRONT FLOOR CARPET ASSEMBLY |
Install the carpet that was pulled back to remove the selector. For further details, refer to the installation procedure (Click here).
| 7. INSTALL FRONT DOOR SCUFF PLATE RH |
- HINT:
- Use the same procedures described for the LH side.
| 8. INSTALL COWL SIDE TRIM BOARD RH |
 |
Attach the 2 clips to install the cowl side trim board RH.
Install the cap nut.
Text in Illustration *a Cap Nut
| 9. INSTALL INSTRUMENT SIDE PANEL RH |
 |
w/ Airbag Cut Off Switch:
Connect the connector.
Attach the 6 claws to install the instrument side panel RH.
| 10. INSTALL FRONT SEAT ASSEMBLY RH |
for Power Seat (Click here).
| 11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 12. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).