Instrument Panel Speaker Removal

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

  4. REMOVE FRONT NO. 4 SPEAKER ASSEMBLY

  5. REMOVE ASSIST GRIP SUB-ASSEMBLY

  6. REMOVE FRONT PILLAR GARNISH LH

  7. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

  8. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY

Instrument Panel Speaker -- Removal


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Instrument Panel Speaker Removal

  1. Put protective tape around the No. 1 speaker opening cover assembly.

    Text in Illustration
    *a
    		Protective Tape

  1. Using a moulding remover A, detach the 8 clips and remove the No. 1 speaker opening cover assembly.



4. REMOVE FRONT NO. 4 SPEAKER ASSEMBLY


  1. Remove the 2 bolts.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Instrument Panel Speaker Removal

  1. Remove the speaker and then disconnect the speaker connector.

    NOTICE:
    Do not touch the cone part of the speaker.


5. REMOVE ASSIST GRIP SUB-ASSEMBLY
HINT:
Use the same procedure for both assist grip sub-assemblies.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the 2 assist grip plugs.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts.

  1. Detach the 2 claws and remove the assist grip sub-assembly.



6. REMOVE FRONT PILLAR GARNISH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the clip 3 guides, and remove the front pillar garnish LH.

  1. w/ Speaker:
    Disconnect the speaker connector and then remove the front pillar garnish.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Instrument Panel Speaker Removal

  1. Protect the curtain shield airbag.

    1. Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.

      NOTICE:
      Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.
      Text in Illustration
      *a
      		Adhesive Tape
      *b
      		Protective Cover
      *c
      		Curtain Shield Airbag Assembly LH


7. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Instrument Panel Speaker Removal

  1. Put protective tape around the No. 1 instrument panel speaker panel sub-assembly.

    Text in Illustration
    *a
    		Protective Tape

  1. Using a moulding remover A, detach the 3 claws and 2 guides and remove the No. 1 instrument panel speaker panel sub-assembly.



8. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY


  1. Remove the 2 bolts.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Instrument Panel Speaker Removal

  1. Remove the speaker and then disconnect the speaker connector.

    NOTICE:
    Do not touch the cone part of the speaker.