Stereo Component Amplifier Removal

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT SEAT ASSEMBLY LH

  4. REMOVE FRONT SEAT ASSEMBLY RH

  5. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER

  6. REMOVE REAR NO. 5 SEAT CUSHION HINGE COVER

  7. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER

  8. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER

  9. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

  10. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER

  11. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER

  12. REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER

  13. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER

  14. REMOVE REAR NO. 1 SEAT ASSEMBLY RH

  15. REMOVE INSTRUMENT SIDE PANEL LH

  16. REMOVE INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

  17. REMOVE INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

  18. REMOVE FRONT DOOR SCUFF PLATE LH

  19. REMOVE FRONT DOOR SCUFF PLATE RH

  20. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

  21. REMOVE COWL SIDE TRIM BOARD LH

  22. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

  23. REMOVE COWL SIDE TRIM BOARD RH

  24. REMOVE REAR STEP COVER

  25. REMOVE REAR DOOR SCUFF PLATE LH

  26. REMOVE REAR DOOR SCUFF PLATE RH

  27. REMOVE NO. 2 AIR DUCT PLUG

  28. REMOVE AIR HEATER GUIDE

  29. REMOVE AIR DUCT PLUG

  30. REMOVE REAR AIR DUCT GUIDE

  31. REMOVE REAR NO. 1 SEAT PROTECTOR

  32. REMOVE REAR NO. 2 SEAT PROTECTOR

  33. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)

  34. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

  35. REMOVE FRONT FLOOR CARPET ASSEMBLY

  36. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET

  37. REMOVE AMPLIFIER COVER

  38. REMOVE NO. 1 AMPLIFIER BRACKET

  39. REMOVE NO. 2 AMPLIFIER BRACKET

Stereo Component Amplifier -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT SEAT ASSEMBLY LH

  1. for Manual Seat:
    Remove the front seat assembly LH (Click here).

  1. for Power Seat:
    Remove the front seat assembly LH (Click here).



4. REMOVE FRONT SEAT ASSEMBLY RH

  1. for Manual Seat:
    Remove the front seat assembly RH (Click here).

  1. for Power Seat:
    Remove the front seat assembly RH (Click here).

    HINT:
    Use the same procedures described for the LH side.


5. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 6 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


6. REMOVE REAR NO. 5 SEAT CUSHION HINGE COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 7 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


7. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Operate the reclining adjuster release handle to move the seat into the position shown in the illustration.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 2 claws and 2 clips, and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


8. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 2 claws and 2 clips, and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


9. REMOVE REAR NO. 1 SEAT ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear Seat Side Airbag:
    Disconnect the connector.

  1. w/ Seat Heater System:
    Disconnect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 4 bolts and seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.


10. REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 6 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


11. REMOVE REAR NO. 4 SEAT CUSHION HINGE COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 7 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


12. REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Operate the reclining adjuster release handle to move the seat into the position shown in the illustration.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 2 claws and 2 clips, and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


13. REMOVE REAR NO. 3 SEAT CUSHION HINGE COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver, detach the 2 claws and 2 clips, and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


14. REMOVE REAR NO. 1 SEAT ASSEMBLY RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear Seat Side Airbag:
    Disconnect the connector.

  1. w/ Seat Heater System:
    Disconnect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 4 bolts and seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.


15. REMOVE INSTRUMENT SIDE PANEL LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Stereo Component Amplifier Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 6 claws and remove the instrument side panel.



16. REMOVE INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Stereo Component Amplifier Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 6 claws and remove the instrument side panel.



17. REMOVE INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Stereo Component Amplifier Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 6 claws.

  1. Disconnect the connector and remove the instrument side panel.



18. REMOVE FRONT DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 7 claws and 4 clips, and remove the scuff plate.



19. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


20. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws.

  1. Detach the 3 claws.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover.



21. REMOVE COWL SIDE TRIM BOARD LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the cap nut.

  1. Detach the 2 clips and remove the cowl side trim board.



22. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the No. 2 instrument panel under cover.



23. REMOVE COWL SIDE TRIM BOARD RH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the cap nut.

  1. Detach the 2 clips and remove the cowl side trim board.



24. REMOVE REAR STEP COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the step cover on the other side.

  1. Detach the 2 claws and remove the step cover.



25. REMOVE REAR DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the 3 claws and 4 clips, and remove the scuff plate.



26. REMOVE REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


27. REMOVE NO. 2 AIR DUCT PLUG


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the 2 plugs.

    HINT:
    Use the same procedures for both sides.


28. REMOVE AIR HEATER GUIDE


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws and guide.

    HINT:
    Use the same procedures for both sides.


29. REMOVE AIR DUCT PLUG


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the plug.

    HINT:
    Use the same procedures for both sides.


30. REMOVE REAR AIR DUCT GUIDE


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the claw and remove the guide.

    HINT:
    Use the same procedures for both sides.


31. REMOVE REAR NO. 1 SEAT PROTECTOR


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the clip and 4 claws, and remove the protector.

    HINT:
    Use the same procedures to remove the protector on the other side.


32. REMOVE REAR NO. 2 SEAT PROTECTOR


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the clip and 4 claws, and remove the protector.

    HINT:
    Use the same procedures to remove the protector on the other side.


33. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)

  1. Remove the cooling box assembly (Click here).



34. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

  1. Remove the rear console box sub-assembly (Click here).



35. REMOVE FRONT FLOOR CARPET ASSEMBLY


  1. Detach the 2 clips and 8 claws.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Stereo Component Amplifier Removal



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the carpet from the floor, open the back door and tail gate, and remove the carpet from the rear of the vehicle.



36. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the 3 connectors.

  1. Remove the 3 bolts and remove the amplifier with bracket.



37. REMOVE AMPLIFIER COVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 clips and remove the cover.



38. REMOVE NO. 1 AMPLIFIER BRACKET


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws and bracket.



39. REMOVE NO. 2 AMPLIFIER BRACKET


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws and bracket.