Rear Seat Entertainment System Visual Mute Signal Circuit Between Radio Receiver And Television Display
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY
CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - TELEVISION DISPLAY)
CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY
REAR SEAT ENTERTAINMENT SYSTEM - Visual Mute Signal Circuit between Radio Receiver and Television Display |
DESCRIPTION
This is the visual mute signal circuit from the multi-media module receiver assembly to the television display assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
1.CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY |
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection
| Condition
| Specified Condition
|
F78-4 (VMTR) - Body ground
| RSE is playing → Source is changed
| 4 V or higher → Below 0.7 V → 4 V or higher
|
Text in Illustration*a
| Component with harness connected (Multi-media Module Receiver Assembly)
|
OK |
|
|
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here) |
|
2.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - TELEVISION DISPLAY) |
Disconnect the F78 multi-media module receiver assembly connector.
Disconnect the L53 television display assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
F78-4 (VMTR) - L53-17 (VMTR)
| Always
| Below 1 Ω
|
F78-4 (VMTR) - Body ground
| Always
| 10 kΩ or higher
|
| REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
3.CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY |
Disconnect the L53 television display assembly connector.
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection
| Condition
| Specified Condition
|
L53-17 (VMTR) - Body ground
| Display is operating
| 4 V or higher
|
Text in Illustration*a
| Front view of wire harness connector (to Television Display Assembly)
|
| REPLACE MULTI-MEDIA MODULE
RECEIVER ASSEMBLY (Click here) |
|
|