Rear Seat Entertainment System Display Signal Circuit Between Multi-Display Controller And Television Display

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (GVIF CABLE)

CHECK HARNESS AND CONNECTOR (GVIF CABLE)

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

1. Check if the GVIF cable connectors between the multi-display controller sub-assembly and the television display assembly have any connection problems (Click here).
   

   OK:

   There are no connection problems.
   

1. Remove the GVIF cable from the multi-display controller sub-assembly and television display assembly.
   

2. Measure the resistance according to the value(s) in the table below.
   
   

   Standard Resistance:

   for RH:

   Tester Connection	Condition	Specified Condition
   L82-1 (GVO1-) - c45-1 (GVI1-)	Always	Below 1 Ω
   L82-2 (GVO1+) - c45-2 (GVI1+)	Always	Below 1 Ω
   L82-3 (GVG1) - c45-3 (GVG1)	Always	Below 1 Ω
   L82-1 (GVO1-) or c45-1 (GVI1-) - Body ground	Always	10 kΩ or higher
   L82-2 (GVO1+) or c45-2 (GVI1+) - Body ground	Always	10 kΩ or higher
   L82-3 (GVG1) or c45-3 (GVG1) - Body ground	Always	10 kΩ or higher

   for LH:

   Tester Connection	Condition	Specified Condition
   L82-4 (GVO2-) - c52-1 (GVI1-)	Always	Below 1 Ω
   L82-5 (GVO2+) - c52-2 (GVI1+)	Always	Below 1 Ω
   L82-6 (GVG2) - c52-3 (GVG1)	Always	Below 1 Ω
   L82-4 (GVO2-) or c52-1 (GVI1-) - Body ground	Always	10 kΩ or higher
   L82-5 (GVO2+) or c52-2 (GVI1+) - Body ground	Always	10 kΩ or higher
   L82-6 (GVG2) or c52-3 (GVG1) - Body ground	Always	10 kΩ or higher

   Text in Illustration

   *A	for RH
   *B	for LH
   *a	GVIF Cable (to Multi-display Controller Sub-assembly)
   *b	GVIF Cable (to Television Display Assembly)