Rear Seat Entertainment System Sound Signal Circuit Between Video Terminal And Multi-Display Controller

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY - HEADPHONE TERMINAL)

REAR SEAT ENTERTAINMENT SYSTEM - Sound Signal Circuit between Video Terminal and Multi-display Controller


DESCRIPTION

This is the sound signal circuit between the headphone terminal and multi-display controller sub-assembly.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Rear Seat Entertainment System Sound Signal Circuit Between Video Terminal And Multi-Display Controller


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER SUB-ASSEMBLY - HEADPHONE TERMINAL)

  1. Disconnect the L68 multi-display controller sub-assembly connector.

  1. Disconnect the P1 headphone terminal connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    L68-6 (R+) - P1-5 (VAR+)
    		Always
    		Below 1 Ω
    L68-7 (L+) - P1-6 (VAL+)
    		Always
    		Below 1 Ω
    L68-8 (SGN3) - P1-7 (VA-)
    		Always
    		Below 1 Ω
    L68-9 (SGN6) - P1-15 (SG)
    		Always
    		Below 1 Ω
    L68-10 (ADPI) - P1-8 (ADPG)
    		Always
    		Below 1 Ω
    L68-6 (R+) - Body ground
    		Always
    		10 kΩ or higher
    L68-7 (L+) - Body ground
    		Always
    		10 kΩ or higher
    L68-8 (SGN3) - Body ground
    		Always
    		10 kΩ or higher
    L68-9 (SGN6) - Body ground
    		Always
    		10 kΩ or higher
    L68-10 (ADPI) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)