Dtc B15B0 Display Screen Malfunction

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

CLEAR DTC

RECHECK DTC

DTC B15B0 Display Screen Malfunction


DESCRIPTION

This DTC is stored when a malfunction occurs in the television display assembly.

DTC Code
DTC Detection Condition
Trouble Area
B15B0
When either condition below is met:
  1. Picture circuit (TFT unit) malfunction
  2. Back light malfunction (excess current)
  1. Television display assembly
  2. Multi-display assembly

INSPECTION PROCEDURE

1.CLEAR DTC

  1. Clear the DTCs (Click here).


NEXT


2.RECHECK DTC

  1. Recheck for DTCs (Click here).

    Result
    Result
    		Proceed to
    DTC B15B0 is not output.
    		A
    DTC B15B0 is output.
    		B

    HINT:
    1. This DTC is output from the multi-media module receiver assembly or television display assembly.
    2. When the DTC is checked using the intelligent tester, whether the DTC is output from the multi-media module receiver assembly, or whether it is output from the television display assembly, cannot be distinguished. For this reason, recheck the DTC using the "System Check Mode" screen.

    1. Enter diagnostic mode and display the "Service Menu" screen (Click here).

    2. Select "Failure Diagnosis Service Check" on the "Service Menu" screen to display the "Failure Diagnosis Service Check" screen.

    3. Select "Service Check Mode" on the "Failure Diagnosis Service Check" screen and perform the service check.

    4. Recheck for DTCs and proceed to the next step according to the table below (Click here).

      Result
      Result
      		Proceed to
      DTC is not output
      		A
      DTC is output from the multi-media module receiver assembly.
      		B
      DTC is output from a television display assembly.
      		C



B
REPLACE MULTI-DISPLAY ASSEMBLY (Click here)

C
REPLACE TELEVISION DISPLAY ASSEMBLY (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)