Rear Seat Entertainment System How To Proceed With Troubleshooting

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK FOR DTC*

  4. CLEAR DTC*

  5. RECHECK FOR DTC*

  6. DIAGNOSTIC TROUBLE CODE CHART

  7. PROBLEM SYMPTOMS TABLE

  8. CHECK ECU TERMINAL ARRANGEMENT BASED ON MALFUNCTION SYMPTOM

  9. CHECK CIRCUIT

  10. RECHECK FOR DIAGNOSTIC TROUBLE CODE*

  11. PERFORM CONFIRMATION TEST

Rear Seat Entertainment System -- How To Proceed With Troubleshooting


HINT:
  1. Use the following procedure to troubleshoot the rear seat entertainment system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

    1. Inspect the battery voltage.

      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding to next step.

    NEXT


    3.CHECK FOR DTC*

    1. Refer to DTC Check / Clear (Click here).

      Result
      Result
      		Proceed to
      DTC is output.
      		A
      DTC is not output.
      		B

      2. HINT:
      If more information is needed, perform a recheck using the "System Check Mode" screen after rechecking for DTCs using the intelligent tester (Click here).


    		B.
    Go to step 7
    A


    4.CLEAR DTC*

    1. Clear the DTCs and finish diagnostic mode.

      HINT:
      The current DTCs may not indicate actual malfunctions depending on the vehicle operating conditions.

    NEXT


    5.RECHECK FOR DTC*

    1. Recheck for DTCs.

      Result
      Result
      		Proceed to
      DTC is output.
      		A
      DTC is not output.
      		B

      HINT:
      1. Even if the malfunction symptom cannot be confirmed, check for DTCs. This is because the system stores history DTCs.
      2. If more information is needed, perform a recheck using the "System Check Mode" screen after rechecking for DTCs using the intelligent tester (Click here).
      3. Check the DTC and inspect the area the code indicates.


    		B.
    Go to step 7
    A


    6.DIAGNOSTIC TROUBLE CODE CHART

    1. Find the output code in the diagnostic trouble code chart (Click here).

      NOTICE:
      1. The rear seat entertainment system outputs DTCs for the following system.
      2. When DTCs other than those in Diagnostic Trouble Code Chart for the rear seat entertainment system are output, refer to Diagnostic Trouble Code Chart for the relevant system.
      3. Refer to Navigation System (Click here)
      4. Refer to Audio and Visual System (w/ Navigation System) (Click here)
      Result
      Result
      		Proceed to
      DTCs for the rear seat entertainment system are output.
      		A
      DTCs for the navigation system are output.
      		B
      DTCs for the audio and visual system (w/ Navigation System) are output.
      		C


    		A.
    Go to step 9

    		B.
    GO TO NAVIGATION SYSTEM (Click here)

    		C.
    GO TO AUDIO AND VISUAL SYSTEM (Click here)

    7.PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table (Click here).

      Result
      Result
      		Proceed to
      Fault is not listed in Problem Symptoms Table.
      		A
      Fault is listed in Problem Symptoms Table.
      		B

      HINT:
      If the symptom does not recur and no DTC is output, perform the symptom simulation method (Click here).


    		B.
    ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE
    A


    8.CHECK ECU TERMINAL ARRANGEMENT BASED ON MALFUNCTION SYMPTOM

    1. Refer to Terminals of ECU (Click here).


    NEXT


    9.CHECK CIRCUIT

    1. Adjust, repair or replace as necessary.


    NEXT


    10.RECHECK FOR DIAGNOSTIC TROUBLE CODE*
      HINT:
      After clearing the DTCs, recheck for DTCs.

    NEXT


    11.PERFORM CONFIRMATION TEST

      NEXT

      END