Audio And Visual System (W/O Navigation System) Radio Receiver Power Source Circuit

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

INSPECT RADIO RECEIVER ASSEMBLY

AUDIO AND VISUAL SYSTEM (w/o Navigation System) - Radio Receiver Power Source Circuit


DESCRIPTION

This circuit provides power to the radio receiver assembly.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Audio And Visual System (W/O Navigation System) Radio Receiver Power Source Circuit


INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
1.INSPECT RADIO RECEIVER ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Audio And Visual System (W/O Navigation System) Radio Receiver Power Source Circuit

  1. Disconnect the F1 radio receiver assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    F1-20 (GND) - Body ground
    		Always
    		Below 1 Ω

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    		Switch Condition
    		Specified Condition
    F1-1 (B) - F1-20 (GND)
    		Always
    		11 to 14 V
    F1-11 (ACC) - F1-20 (GND)
    		Engine switch on (ACC)
    		11 to 14 V
    Text in Illustration
    *1
    		Front view of wire harness connector
    (to Radio Receiver Assembly)


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)