Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200
CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY- STEREO COMPONENT AMPLIFIER ASSEMBLY)
AUDIO AND VISUAL SYSTEM (w/o Navigation System) - Sound Signal Circuit between Radio Receiver and Stereo Component Amplifier |
DESCRIPTION
The radio receiver assembly sends sounds signal to the stereo component amplifier assembly through this circuit.The sound signal that has been sent is amplified by the stereo component amplifier assembly, and then is sent to the speakers.
If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the stereo component amplifier assembly or speakers.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY- STEREO COMPONENT AMPLIFIER ASSEMBLY) |
Disconnect the F1 radio receiver assembly and F18 stereo component amplifier assembly connectors.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition F1-9 (L+) - F18-3 (L+) Always Below 1 Ω F1-19 (L-) - F18-2 (L-) Always Below 1 Ω F1-8 (R+) - F18-5 (R+) Always Below 1 Ω F1-18 (R-) - F18-4 (R-) Always Below 1 Ω F1-9 (L+) - Body ground Always 10 kΩ or higher F1-19 (L-) - Body ground Always 10 kΩ or higher F1-8 (R+) - Body ground Always 10 kΩ or higher F1-18 (R-) - Body ground Always 10 kΩ or higher F1-10 (SLD) - Body ground Always 10 kΩ or higher
|
| ||||
| OK | ||
| ||