Dtc Cb-52 No Playable Ipod File Exists
DESCRIPTION
INSPECTION PROCEDURE
CHECK USB DEVICE OR "iPod"
REPLACE USB DEVICE OR "iPod"
CLEAR DTC
RECHECK FOR DTC
DTC CB-52 No Playable iPod File Exists |
DTC CB-7E No Playable USB File Exists |
DESCRIPTION
DTC No.
| DTC Detection Condition
| Trouble Area
|
CB-52
| No playable files on the "iPod"
| "iPod"
|
CB-7E
| No playable files on the USB device
| USB device
|
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs.
1.CHECK USB DEVICE OR "iPod" |
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Check if playable files are present on the USB device or "iPod".
- HINT:
- Refer to System Description for playable files (Click here).
ResultResult
| Proceed to
|
No playable files exist.
| A
|
Playable files exist.
| B
|
2.REPLACE USB DEVICE OR "iPod" |
Turn the engine switch off.
- HINT:
- When one of these DTCs has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the engine switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
Clear the DTCs (Click here).
Recheck for DTCs and check if the same DTC occurs again.
- HINT:
- If DTCs are detected frequently, replace the multi-media interface ECU.
- OK:
- Malfunction disappears.
OK |
|
|
|
USB DEVICE OR "iPod" WAS DEFECTIVE |
|