Dtc Cb-10 System Microcomputer Malfunction

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

REPLACE USB DEVICE OR "iPod"

CLEAR DTC

RECHECK FOR DTC

DTC CB-10 System Microcomputer Malfunction

DTC CB-11 Media Interface Microcomputer Malfunction

DTC CB-12 CD-LSI Malfunction


DESCRIPTION


DTC No.
DTC Detection Condition
Trouble Area
CB-10
System microcomputer malfunction
  1. Multi-media interface ECU
  2. USB device or "iPod"
CB-11
Media interface microcomputer malfunction
CB-12
CD-LSI (large scale integration) malfunction

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.
1.REPLACE USB DEVICE OR "iPod"

  1. Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

  1. Turn the engine switch off.

    HINT:
    When one of these DTCs has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.

  1. Turn the engine switch on (ACC).

  1. Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.


NEXT


2.CLEAR DTC

  1. Clear the DTCs (Click here).


NEXT


3.RECHECK FOR DTC

  1. Recheck for DTCs and check if the same DTC occurs again.

    HINT:
    If DTCs are detected frequently, replace the multi-media interface ECU.
    OK:
    Malfunction disappears.


NG
REPLACE MULTI-MEDIA INTERFACE ECU (Click here)
OK

USB DEVICE OR "iPod" WAS DEFECTIVE