Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200
AUDIO AND VISUAL SYSTEM (w/ Navigation System) - Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter |
DESCRIPTION
The No. 1 stereo jack adapter assembly sends the sound signal from an external device to the multi-media module receiver assembly through this circuit.The sound signal that has been sent is amplified by the stereo component amplifier assembly or multi-media module receiver assembly, and then is sent to the speakers.
If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the stereo component amplifier assembly, multi-media module receiver assembly or speakers.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY) |
Disconnect the F78 multi-media module receiver assembly connector.
Disconnect the z62 No. 1 stereo jack adapter assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition F78-16 (ADPG) - z62-8 (AUXO) Always Below 1 Ω F78-7 (VAR+) - z62-5 (ARO) Always Below 1 Ω F78-8 (VAL+) - z62-6 (ALO) Always Below 1 Ω F78-15 (VA-) - z62-7 (ASGN) Always Below 1 Ω F78-5 (AGND) - z62-9 (AGND) Always Below 1 Ω F78-16 (ADPG) - Body ground Always 10 kΩ or higher F78-7 (VAR+) - Body ground Always 10 kΩ or higher F78-8 (VAL+) - Body ground Always 10 kΩ or higher F78-15 (VA-) - Body ground Always 10 kΩ or higher F78-5 (AGND) - Body ground Always 10 kΩ or higher
|
| ||||
| OK | ||
| ||