Steering Lock System Dtc Check / Clear

Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Steering Column. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CHECK FOR DTC (MAIN BODY ECU)

  1. CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY))

  1. CLEAR DTC (MAIN BODY ECU)

  1. CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY))

Steering Lock System -- Dtc Check / Clear


NOTICE:
  1. The steering lock ECU (steering lock actuator assembly) does not store past DTCs. If any DTCs are output, confirm and record them as soon as possible. Do not turn the engine switch off or clear the DTCs until the DTCs are confirmed and recorded.
  2. DTCs may have been stored due to problems unrelated to the steering lock system. Be sure to confirm and record any DTCs output for other systems.
  3. When using the GTS with the engine switch off, connect the GTS to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select the vehicle type under manual mode and enter the following menus:
    Body Electrical / Entry&Start. While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.

CHECK FOR DTC (MAIN BODY ECU)

  1. Turn the engine switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the engine switch on (IG).

  4. Turn the GTS on.

  5. Enter the following menus: Body Electrical / Main Body / Trouble Codes.

  6. Check for DTCs.


CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY))
HINT:
The steering lock system DTCs are output from the steering lock ECU (steering lock actuator assembly) via the certification ECU (smart key ECU assembly).

  1. Turn the engine switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the engine switch on (IG).

  4. Turn the GTS on.

  5. Enter the following menus: Body Electrical / Entry&Start / Trouble Codes.

  6. Check for DTCs.


CLEAR DTC (MAIN BODY ECU)

  1. Turn the engine switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the engine switch on (IG).

  4. Turn the GTS on.

  5. Enter the following menus: Body Electrical / Main Body / Trouble Codes.

  6. Clear the DTCs.


CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY))

  1. Turn the engine switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the engine switch on (IG).

  4. Turn the GTS on.

  5. Enter the following menus: Body Electrical / Entry&Start / Trouble Codes.

  6. Clear the DTCs.