Power Tilt And Power Telescopic Steering Column System How To Proceed With Troubleshooting

Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Steering Column. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK CAN COMMUNICATION SYSTEM*

  4. CHECK FOR DTC*

  5. PROBLEM SYMPTOMS TABLE

  6. OVERALL ANALYSIS AND TROUBLESHOOTING*

  7. REPAIR

  8. CONFIRMATION TEST

Power Tilt And Power Telescopic Steering Column System -- How To Proceed With Troubleshooting


HINT:
  1. Use the following procedures to troubleshoot the power tilt and telescopic steering column system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.CHECK CAN COMMUNICATION SYSTEM*

    1. Use the intelligent tester to check if the CAN communication system is functioning normally.

      Result
      Result
      		Proceed to
      CAN DTC is not output
      		A
      for LHD:
      CAN DTC is output
      		B
      for RHD:
      CAN DTC is output
      		C



    		B.
    Go to CAN COMMUNICATION SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)

    		C.
    Go to CAN COMMUNICATION SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
    A


    4.CHECK FOR DTC*

    1. Check for DTCs (Click here).

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs (Click here).

      Result
      Result
      		Proceed to
      DTC is not output
      		A
      DTC is output
      		B



    		B.
    Go to POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) (Click here)
    A


    5.PROBLEM SYMPTOMS TABLE
      Result
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B


    		B.
    Go to step 7
    A


    6.OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Terminals of ECU (Click here)

    2. Data List/Active Test (Click here)


    NEXT


    7.REPAIR

      NEXT


      8.CONFIRMATION TEST

        NEXT

        END