Power Steering Ecu (W/ Variable Flow Control Solenoid Valve) Installation

Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Power Assist Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL POWER STEERING ECU ASSEMBLY

  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)

  3. INSTALL NO. 1 SWITCH HOLE BASE (for RHD)

  4. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD)

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  6. CHECK SRS WARNING LIGHT

Power Steering Ecu (W/ Variable Flow Control Solenoid Valve) -- Installation



1. INSTALL POWER STEERING ECU ASSEMBLY

  1. for LHD:

    1. Attach the claw and install the power steering ECU with the bolt.

      Torque:
      8.0 N*m{82 kgf*cm, 71 in.*lbf}

    2. Connect the connectors to the junction block.

    3. Install the junction block with the bolt and nut.

      Torque:
      8.0 N*m{82 kgf*cm, 71 in.*lbf}

  1. for RHD:

    1. Install the bolt and power steering ECU assembly to the junction block.

      Torque:
      8.0 N*m{82 kgf*cm, 71 in.*lbf}

    2. Connect the connectors and attach the wire harness clamp to the junction block.

    3. Install the junction block with the 2 nuts and bolt.

      Torque:
      8.0 N*m{82 kgf*cm, 71 in.*lbf}


2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for LHD)
(Click here)


3. INSTALL NO. 1 SWITCH HOLE BASE (for RHD)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the connectors.

  1. Attach the 4 claws to install the No. 1 switch hole base.



4. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD)
(Click here)


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


6. CHECK SRS WARNING LIGHT
(Click here)