Power Steering Ecu (For 1Vd-Ftv With Dpf) Removal

Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Power Assist Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY

  4. REMOVE POWER STEERING ECU ASSEMBLY

Power Steering Ecu (For 1Vd-Ftv With Dpf) -- Removal


HINT:
  1. Use the same procedure RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. PRECAUTION
NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
(Click here)


4. REMOVE POWER STEERING ECU ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt

  1. Disconnect the connector remove the power steering ECU.