Brake Pedal (For Lhd) Removal

Brake. Land Cruiser. Urj200, 202 Grj200 Vdj200
Brake System (Other). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT DOOR SCUFF PLATE LH

  4. REMOVE COWL SIDE TRIM BOARD LH

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  7. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

  8. REMOVE PUSH ROD PIN

  9. REMOVE STOP LIGHT SWITCH ASSEMBLY

  10. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

Brake Pedal (For Lhd) -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 7 claws and 4 clips, and remove the scuff plate.



4. REMOVE COWL SIDE TRIM BOARD LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the cap nut.

  1. Detach the 2 clips and remove the cowl side trim board.



5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws.

  1. Detach the 3 claws.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover.



6. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake System (Other).Brake System.Brake Pedal (For Lhd) Removal

  1. Using a screwdriver, detach the 2 claws and open the hole cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *1
    		Protective Tape


  1. w/ Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 16 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake System (Other).Brake System.Brake Pedal (For Lhd) Removal



  1. w/o Driver Side Knee Airbag:

    1. Remove the 2 bolts.



    2. Detach the 9 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake System (Other).Brake System.Brake Pedal (For Lhd) Removal



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. for Automatic Air Conditioning System:

    1. Detach the 2 claws and remove the room temperature sensor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and disconnect the 2 control cables.

  1. Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.



7. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake System (Other).Brake System.Brake Pedal (For Lhd) Removal

  1. Remove the 5 bolts and driver side knee airbag.

  1. Disconnect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.


8. REMOVE PUSH ROD PIN


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake System (Other).Brake System.Brake Pedal (For Lhd) Removal

  1. Remove the clip and push rod pin from the brake pedal lever.



9. REMOVE STOP LIGHT SWITCH ASSEMBLY

  1. Disconnect the stop light switch connector.

  1. Remove the stop light switch (Click here).



10. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake System (Other).Brake System.Brake Pedal (For Lhd) Removal

  1. Loosen the hexagon bolt.

    HINT:
    Hold the bolt in place and loosen the nut.
    NOTICE:
    Only loosen the nut. Do not remove the bolt or nut.

  1. Remove the brake pedal support reinforcement set bolt.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake System (Other).Brake System.Brake Pedal (For Lhd) Removal

  1. Remove the 4 nuts and brake pedal support assembly.