Brake. Land Cruiser. Urj200, 202 Grj200 Vdj200
Brake Control Dynamic Control Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200
Crawl Switch -- Installation |
| 1. INSTALL SUSPENSION CONTROL SWITCH (CRAWL SWITCH) |
Attach the 4 claws to install the suspension control switch (CRAWL switch).
 |
Connect the 2 connectors.
| 2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Connect the connectors.
 |
Attach the 14 claws to install the console panel.
| 3. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY |
Attach the 4 claws to install the box.
 |
| 4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Attach the 9 claws to install the panel.
 |
| 5. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Connect the connectors.
 |
Attach the 7 claws to install the panel.
| 6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
Install the shift lever knob and twist it in the direction indicated by the arrow.
| 7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
Attach the 7 claws to install the panel pad.
 |
Install the screw.
Install the clip.
| 8. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the panel cushion.
 |
| 9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
Connect the connectors and 2 clamps.
 |
Attach the 8 claws to install the panel pad.
Install the screw.
Install the clip.
| 10. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
Attach the 7 claws to install the panel cushion.
 |
| 11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).