Deceleration Sensor (W/ Abs) Installation
Brake. Land Cruiser. Urj200, 202 Grj200 Vdj200
INSTALL DECELERATION SENSOR (for Automatic Transmission)
INSTALL DECELERATION SENSOR (for Manual Transmission)
INSTALL LOWER CONSOLE BOX (w/o Console Box Lid)
INSTALL COOLING BOX ASSEMBLY (w/ Cool Box)
INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM G SENSOR ZERO POINT CALIBRATION
CHECK G SENSOR SIGNAL
Deceleration Sensor (W/ Abs) -- Installation |
| 1. INSTALL DECELERATION SENSOR (for Automatic Transmission) |
Connect the sensor connector, and then attach the clamp to the hole of the sensor bracket.
- NOTICE:
- Securely connect the connector.
Install the sensor with the 2 bolts.
- Torque:
- 15 N*m{148 kgf*cm, 11 ft.*lbf}
- NOTICE:
- Make sure that the sensor is oriented correctly.
- If the sensor is dropped, replace it.
- When installing the sensor, make sure to avoid impacts to the sensor.
| 2. INSTALL DECELERATION SENSOR (for Manual Transmission) |
Connect the sensor connector, and then attach the clamp to the hole of the sensor bracket.
Install the sensor with the 2 bolts.
- Torque:
- 15 N*m{148 kgf*cm, 11 ft.*lbf}
- NOTICE:
- Make sure that the sensor is oriented correctly.
- If the sensor is dropped, replace it.
- Securely connect the connector.
- When installing the sensor, make sure to avoid impacts to the sensor.
| 3. INSTALL LOWER CONSOLE BOX (w/o Console Box Lid) |
(Click here)
| 4. INSTALL COOLING BOX ASSEMBLY (w/ Cool Box) |
(Click here)
| 5. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box) |
(Click here)
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 7. PERFORM G SENSOR ZERO POINT CALIBRATION |
Perform the G sensor zero point calibration (Click here).
Check the G sensor signal (Click here).
