Vehicle Stability Control System Multi-Terrain Select Indicator Light Does Not Come On

Brake. Land Cruiser. Urj200, 202 Grj200 Vdj200
Brake Control Dynamic Control Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

CHECK CAN COMMUNICATION LINE

CHECK DTC (CAN COMMUNICATION SYSTEM)

VEHICLE STABILITY CONTROL SYSTEM - Multi-terrain Select Indicator Light does not Come ON


DESCRIPTION

When the transfer gear position is L4, the multi-terrain select indicator light illuminates and control begins.
Under any of the following conditions, the multi-terrain select system does not begin control and the multi-terrain select indicator light does not illuminate.
HINT:
When crawl control is activated with all of the crawl control activation conditions fulfilled during multi-terrain select control and the accelerator pedal is depressed, the multi-terrain select indicator light and crawl indicator light illuminate and multi-terrain select control enters "AUTO" mode. When the accelerator pedal is released, the multi-terrain select indicator light and crawl indicator light illuminate and crawl control begins.
  1. The vehicle is in the VSC/TRC OFF state.
  2. There is a malfunction in the VSC system.

INSPECTION PROCEDURE

1.CHECK CAN COMMUNICATION LINE

  1. Turn the ignition switch off.

  1. Connect the GTS to the DLC3.

  1. Turn the ignition switch to ON and the GTS on.

  1. Select "CAN Bus Check" from the System Selection Menu screen, and follow the prompts on the screen to inspect the CAN Bus.

    OK:
    "CAN Bus Check" indicates no malfunctions in CAN communication.

    Result
    Result
    		Proceed to
    OK
    		A
    NG (for LHD (with Central Gateway ECU))
    		B
    NG (for LHD (without Central Gateway ECU))
    		C
    NG (for RHD (with Central Gateway ECU))
    		D
    NG (for RHD (without Central Gateway ECU))
    		E


B
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

D
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

E
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)
A


2.CHECK DTC (CAN COMMUNICATION SYSTEM)

  1. Turn the ignition switch off.

  1. Connect the GTS to the DLC3.

  1. Turn the ignition switch to ON and the GTS on.

  1. for LHD (with Central Gateway ECU):
    Check for DTCs (Click here).

  1. for LHD (without Central Gateway ECU):
    Check for DTCs (Click here).

  1. for RHD (with Central Gateway ECU):
    Check for DTCs (Click here).

  1. for RHD (without Central Gateway ECU):
    Check for DTCs (Click here).

    Result
    Result
    		Proceed to
    CAN DTC is not output
    		A
    CAN DTC is output (for LHD (with Central Gateway ECU))
    		B
    CAN DTC is output (for LHD (without Central Gateway ECU))
    		C
    CAN DTC is output (for RHD (with Central Gateway ECU))
    		D
    CAN DTC is output (for RHD (without Central Gateway ECU))
    		E



B
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

D
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

E
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)
A

GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)