Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL
CAMSHAFT POSITION SENSOR - REMOVAL
| 1. REMOVE V-BANK COVER SUB-ASSEMBLY |
Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
| *1 | Bracket |
| *2 | Hook |
| *3 | Pin |
| *4 | Grommet |
| 2. REMOVE AIR CLEANER HOSE ASSEMBLY |
Disconnect the vacuum hose and No. 2 ventilation hose.
Loosen the 2 hose clamps.
Remove the air cleaner hose.
| 3. REMOVE CAMSHAFT POSITION SENSOR |
Disconnect the sensor connector.
Remove the bolt and sensor.
| 4. REMOVE VVT SENSOR |
Disconnect the 4 sensor connectors.
Remove the 4 bolts and 4 sensors.
| *A | for Bank 2 |
| *B | for Bank 1 |