Accelerator Pedal - On-Vehicle Inspection

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 3UR-FE ENGINE CONTROL

ACCELERATOR PEDAL - ON-VEHICLE INSPECTION

1. INSPECT ACCELERATOR PEDAL ASSEMBLY

Connect the intelligent tester to the DLC3.

Turn the engine switch on (IG).

Turn the intelligent tester main switch on.

Enter the following menus: Powertrain / Engine and ECT / Data List / ETCS / Accelerator Position No. 1 and Accelerator Position No. 2.

Read the value displayed on the intelligent tester.

  • Standard Value:
  • Tester DisplayConditionSpecified Condition
    Accel Sens. No.1 Volt %Released10 to 22%
    Depressed52 to 90%
    Accel Sens. No.2 Volt %Released24 to 40%
    Depressed68 to 99%

If the result is not as specified, check the accelerator pedal, wire harness and ECM.