Brake. Land Cruiser. Urj200, 202 Grj200 Vdj200
Brake Control Dynamic Control Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200
Vehicle Stability Control System -- Problem Symptoms Table |
- HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- NOTICE:
- When replacing the master cylinder or sensor, turn the ignition switch off.
| Symptom | Suspected Area | See page |
| ABS, BA and/or EBD does not operate | Check for DTCs again and make sure that no DTC is output | Click here |
| IG power source circuit | Click here | |
| Front speed sensor circuit | Click here | |
| Rear speed sensor circuit | Click here | |
| Master cylinder pressure sensor (check master cylinder pressure sensor by performing test mode inspection) | Click here | |
| for LHD: Check hydraulic brake booster with GTS. If abnormal, check hydraulic circuit for leakage. | Click here | |
| for RHD: Check hydraulic brake booster with GTS. If abnormal, check hydraulic circuit for leakage. | Click here | |
| for LHD: If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid | Click here | |
| for RHD: If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid | Click here | |
| ABS, BA and/or EBD does not operate efficiently | Check for DTCs again and make sure that no DTC is output | Click here |
| Front speed sensor circuit | Click here | |
| Rear speed sensor circuit | Click here | |
| Stop light switch circuit | Click here | |
| Master cylinder pressure sensor (check master cylinder pressure sensor by performing test mode inspection) | Click here | |
| for LHD: Check hydraulic brake booster with GTS. If abnormal, check hydraulic circuit for leakage. | Click here | |
| for RHD: Check hydraulic brake booster with GTS. If abnormal, check hydraulic circuit for leakage. | Click here | |
| for LHD: If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid | Click here | |
| for RHD: If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid | Click here | |
| VSC and/or TRC does not operate | Check for DTCs again and make sure that no DTC is output | Click here |
| IG power source circuit | Click here | |
| Front speed sensor circuit | Click here | |
| Rear speed sensor circuit | Click here | |
| Yaw rate sensor circuit | Click here | |
| Steering angle sensor circuit | Click here | |
| for LHD: If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid | Click here | |
| for RHD: If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid | Click here | |
| Sensor and switch signal check cannot be performed | TS and CG terminal circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| DTC check cannot be performed | Check for DTCs again and make sure that no DTC is output | Click here |
| TC and CG terminal circuit | Click here | |
| IG power source circuit (high power supply voltage malfunction) | Click here | |
| for LHD: If the symptoms still occur even after the above circuits in suspected areas are inspected and proved to be normal, replace the master cylinder solenoid | Click here | |
| for RHD: If the symptoms still occur even after the above circuits in suspected areas are inspected and proved to be normal, replace the master cylinder solenoid | Click here | |
| ABS warning light abnormal (Remains on) | ABS warning light circuit | Click here |
| IG power source circuit (high power supply voltage malfunction) | Click here | |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| ABS warning light abnormal (Does not come on) | ABS warning light circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| Brake warning light abnormal (Remains on) | Brake warning light circuit | Click here |
| IG power source circuit (high power supply voltage malfunction) | Click here | |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| Brake warning light abnormal (Does not come on) | Brake warning light circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| Slip indicator light abnormal (Remains on) | Slip indicator light circuit | Click here |
| IG power source circuit (high power supply voltage malfunction) | Click here | |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| Slip indicator light abnormal (Does not come on) | Slip indicator light circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| VSC OFF indicator light abnormal (Remains on) | VSC OFF indicator light circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| VSC OFF indicator light abnormal (Does not come on) | VSC OFF indicator light circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| Buzzer abnormal | VSC buzzer circuit | Click here |
| TRC OFF indicator light abnormal (Remains on) | TRC OFF indicator light circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| TRC OFF indicator light abnormal (Does not come on) | TRC OFF indicator light circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| CRAWL indicator light abnormal (Remains on) | CRAWL indicator light circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| CRAWL indicator light abnormal (Does not come on) | CRAWL indicator light circuit | Click here |
| for LHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| for RHD: Skid control ECU (Master cylinder solenoid) | Click here | |
| Turn assist indicator light abnormal | Turn assist indicator light circuit | Click here |
| Multi-terrain select indicator light abnormal (Remains on)* | Multi-terrain select indicator light circuit | Click here |
| Multi-terrain select indicator light abnormal (Does not come on)* | Multi-terrain select indicator light circuit | Click here |