Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200
Tire Pressure Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200
Tire Pressure Warning Receiver -- Installation |
| 1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER |
Connect the connector to the tire pressure warning ECU and receiver.
Attach the guide and clamp to temporarily install the tire pressure warning ECU and receiver.
Install the bolt.
- Torque:
- Bolt A:
- 13 N*m{127 kgf*cm, 9 ft.*lbf}
- Bolt B:
- 8.3 N*m{85 kgf*cm, 73 in.*lbf}
Text in Illustration *a Bolt A *b Bolt B - NOTICE:
- The different marks on the heads of the bolts are shown in the illustration. Check whether the bolt being used is bolt A or bolt B, and then tighten the bolt using the appropriate torque.
 |
| 2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH |
- w/o Sliding Roof: (Click here)
- w/ Sliding Roof: (Click here)
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 4. REGISTRATION OF TRANSMITTER ID |
| 5. INSPECT TIRE PRESSURE WARNING SYSTEM |
| 6. PERFORM INITIALIZATION |