Dtc C2176/76 Receiver Error

Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200
Tire Pressure Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

CHECK DTC OUTPUT (C2176/76)

DTC C2176/76 Receiver Error


DESCRIPTION

The signals are transmitted to the tire pressure warning ECU and receiver in the vehicle as radio waves.

DTC No.
DTC Detection Condition
Trouble Area
C2176/76
Malfunction in the tire pressure warning ECU and receiver internal circuit
Tire pressure warning ECU and receiver

INSPECTION PROCEDURE

NOTICE:
  1. When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the GTS and write them down before removal.
  2. It is necessary to perform initialization (Click here) after registration (Click here) of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU has been replaced.
1.CHECK DTC OUTPUT (C2176/76)

  1. Clear the DTCs (Click here).

  1. Turn the engine switch off.

  1. Turn the engine switch on (IG) and check for DTCs (Click here).

    OK:
    DTC C2176/76 is not output.


NG
REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER (Click here)
OK

END