Front Stabilizer Bar (W/O Kdss) Installation

Install the 2 bushes to the outer side of the bush stoppers on the front stabilizer bar as shown in the illustration.

NOTICE:

Be sure to install the front No. 1 stabilizer bar bushes so that the cut and bump of each bush faces the under of the vehicle.

Set the stabilizer bracket so that the arrow mark is facing the front side of the vehicle.

Temporarily install the 2 stabilizer brackets and front stabilizer bar with the 4 bolts.

Temporarily install the stabilizer link with the nut and bolt.

Tighten the nut.

Torque:

128 N*m{1305 kgf*cm, 94 ft.*lbf}

Temporarily install the stabilizer link with the nut and bolt.

Tighten the nut.

Torque:

128 N*m{1305 kgf*cm, 94 ft.*lbf}

Tighten the 2 bolts.

Torque:

87 N*m{887 kgf*cm, 64 ft.*lbf}

NOTICE:

Tighten the bolts in 3 steps, in the order shown in the illustration.

Tighten the 2 bolts.

Torque:

87 N*m{887 kgf*cm, 64 ft.*lbf}

NOTICE:

Tighten the bolts in 3 steps, in the order shown in the illustration.

Install the No. 1 engine under cover sub-assembly with the 10 bolts.

Torque:

29 N*m{296 kgf*cm, 21 ft.*lbf}

Push in the clip to install the front fender splash shield sub-assembly LH.

Install the 3 bolts and screw.

Push in the clip to install the front fender splash shield sub-assembly RH.

Install the 3 bolts and 2 screws.

Install the front wheels.

Torque:

for aluminum wheel:

131 N*m{1336 kgf*cm, 97 ft.*lbf}

for steel wheel:

209 N*m{2131 kgf*cm, 154 ft.*lbf}

Lower the vehicle.

Press down on the vehicle several times to stabilize the suspension.

Tighten the bolt.

Torque:

135 N*m{1376 kgf*cm, 100 ft.*lbf}

NOTICE:

Perform this procedure with all 4 wheels on the ground.

Tighten the bolt.

Torque:

135 N*m{1376 kgf*cm, 100 ft.*lbf}

NOTICE:

Perform this procedure with all 4 wheels on the ground.