Front Stabilizer Bar (W/ Kdss) Inspection

Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200
Front Suspension. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT FRONT STABILIZER LINK ASSEMBLY RH

Front Stabilizer Bar (W/ Kdss) -- Inspection



1. INSPECT FRONT STABILIZER LINK ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Temporarily install the nut, and flip the ball joint stud back and forth 5 times as shown in the illustration.

  1. Use a torque wrench to turn the nut continuously at a rate of 2 to 3 seconds per turn. Take the torque reading on the fifth turn.

    Standard turning torque:
    0.5 to 3.4 N*m (5.1 to 36 kgf*cm, 4.4 to 30 in.*lbf)
    1. If the value is not within the specified range, replace the front stabilizer link with a new one.

  1. Check the dust boot for cracks or grease leakage.