Input Shaft Reassembly

Drivetrain. Land Cruiser. Urj200, 202 Grj200 Vdj200
H150F Manual Transmission Transaxle. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL INPUT SHAFT FRONT BEARING

  2. INSTALL FRONT BEARING SHAFT SNAP RING

  3. INSTALL INPUT SHAFT BEARING

Input Shaft -- Reassembly



1. INSTALL INPUT SHAFT FRONT BEARING


Land Cruiser. Urj200, 202 Grj200 Vdj200.H150F Manual Transmission Transaxle.Manual Transmission System.Input Shaft Reassembly

  1. Using SST and a press, install the input shaft front bearing to the input shaft.

    SST
    09316-20011
    HINT:
    Make sure that the groove of the bearing faces the correct direction as shown in the illustration.


2. INSTALL FRONT BEARING SHAFT SNAP RING


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Select a new snap ring that will allow minimum clearance.

    Standard Clearance:
    0.1 mm (0.00393 in.) or less
    Snap Ring Thickness:
    Part No.
    		Thickness
    		Mark
    90520-45003
    		2.50 to 2.55 mm
    (0.0984 to 0.100 in.)
    		A
    90520-45004
    		2.55 to 2.60 mm
    (0.100 to 0.102 in.)
    		B
    90520-45005
    		2.60 to 2.65 mm
    (0.102 to 0.104 in.)
    		C
    90520-45006
    		2.65 to 2.70 mm
    (0.104 to 0.106 in.)
    		D
    90520-45007
    		2.70 to 2.75 mm
    (0.106 to 0.108 in.)
    		E
    90520-45008
    		2.75 to 2.80 mm
    (0.108 to 0.110 in.)
    		F


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a snap ring expander, install the snap ring to the input shaft.



3. INSTALL INPUT SHAFT BEARING

  1. Apply MP grease to the 12 roller bearings.

  1. Install the 12 roller bearings into the input shaft.