Automatic Transmission System Pattern Select Switch Sport Mode Circuit

Drivetrain. Land Cruiser. Urj200, 202 Grj200 Vdj200
Ae80F Automatic Transmission Transaxle. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

INSPECT SPORT S/S+ SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY)

CHECK HARNESS AND CONNECTOR (INTEGRATION CONTROL AND PANEL ASSEMBLY - BODY GROUND)

CHECK HARNESS AND CONNECTOR (INTEGRATION CONTROL AND PANEL ASSEMBLY - ECM)

AUTOMATIC TRANSMISSION SYSTEM - Pattern Select Switch Sport Mode Circuit


DESCRIPTION

The TCM memory contains the programs for the normal and sport shift patterns.
By following the programs corresponding to the signals from the SPORT S/S+ switch (integration control and panel assembly), the park/neutral position switch and other various sensors, the TCM switches the solenoid valves on and off, and controls the transmission gear change operation.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Ae80F Automatic Transmission Transaxle.Automatic Transmission System.Automatic Transmission System Pattern Select Switch Sport Mode Circuit


INSPECTION PROCEDURE

1.INSPECT SPORT S/S+ SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Ae80F Automatic Transmission Transaxle.Automatic Transmission System.Automatic Transmission System Pattern Select Switch Sport Mode Circuit

  1. Remove the integration control and panel assembly (Click here).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    3 (P) - 5 (E)
    		SPORT S/S+ switch on
    		Below 1 Ω
    2 (B) - 5 (E)
    		NORM switch on
    		Below 1 Ω
    3 (P) - 5 (E)
    		SPORT S/S+ switch off
    		10 kΩ or higher
    2 (B) - 5 (E)
    		NORM switch off
    		10 kΩ or higher
    Text in Illustration
    *a
    		Component without harness connected
    (Integration Control and Panel Assembly)


NG
REPLACE INTEGRATION CONTROL AND PANEL ASSEMBLY (Click here)
OK


2.CHECK HARNESS AND CONNECTOR (INTEGRATION CONTROL AND PANEL ASSEMBLY - BODY GROUND)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Ae80F Automatic Transmission Transaxle.Automatic Transmission System.Automatic Transmission System Pattern Select Switch Sport Mode Circuit

  1. Disconnect the integration control and panel assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    V9-5 (E) - Body ground
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Front view of wire harness connector
    (to Integration Control and Panel Assembly)


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


3.CHECK HARNESS AND CONNECTOR (INTEGRATION CONTROL AND PANEL ASSEMBLY - ECM)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Ae80F Automatic Transmission Transaxle.Automatic Transmission System.Automatic Transmission System Pattern Select Switch Sport Mode Circuit

  1. Disconnect the ECM connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    A38-34 (PWMS) - Body ground
    		SPORT S/S+ switch on
    		Below 1 Ω
    A38-49 (SPCN) - Body ground
    		NORM switch on
    		Below 1 Ω
    A38-34 (PWMS) - Body ground
    		SPORT S/S+ switch off
    		10 kΩ or higher
    A38-49 (SPCN) - Body ground
    		NORM switch off
    		10 kΩ or higher
    Text in Illustration
    *a
    		Front view of wire harness connector
    (to ECM)


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)