Shift Lever (W/O Entry And Start System) Installation

Install the floor shift with the 4 bolts. Tighten the bolts in the order shown in the illustration.

Torque:

14 N*m{143 kgf*cm, 10 ft.*lbf}

Connect the 2 connectors.

Turn the control shaft lever RH of the park/neutral position switch counterclockwise until it stops, and then turn it clockwise 2 notches to set it to the N position.

Move the shift lever to N.

Temporarily install the floor shift gear shifting rod with the nut.

Tighten the nut while lightly pushing the lever rearward.

Torque:

13 N*m{130 kgf*cm, 9 ft.*lbf}