Shift Lever (W/O Entry And Start System) Reassembly
Drivetrain. Land Cruiser. Urj200, 202 Grj200 Vdj200
INSTALL SHIFT LOCK CONTROL ECU
INSTALL LOWER POSITION INDICATOR HOUSING
INSTALL SHIFT LOCK RELEASE BUTTON
INSTALL POSITION INDICATOR SLIDE COVER AND NO. 2 POSITION INDICATOR SLIDE COVER
INSTALL POSITION INDICATOR LENS
INSTALL POSITION INDICATOR HOUSING ASSEMBLY
INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Shift Lever (W/O Entry And Start System) -- Reassembly |
| 1. INSTALL SHIFT LOCK CONTROL ECU |
Attach the 3 claws to install the ECU to the floor shift.
Connect the shift lock solenoid connector.
| 2. INSTALL LOWER POSITION INDICATOR HOUSING |
Attach the 6 claws to install the housing.
| 3. INSTALL SHIFT LOCK RELEASE BUTTON |
Attach the 2 claws to install the spring and button.
| 4. INSTALL POSITION INDICATOR SLIDE COVER AND NO. 2 POSITION INDICATOR SLIDE COVER |
Install the No. 2 position indicator slide cover to the position indicator slide cover.
Install the position indicator slide cover together with the No. 2 position indicator slide cover.
- HINT:
- Install the position indicator slide cover so that its mark faces the vehicle front.
| 5. INSTALL POSITION INDICATOR LENS |
Attach the 4 claws to install the position indicator lens.
| 6. INSTALL POSITION INDICATOR HOUSING ASSEMBLY |
Attach the 4 claws to install the position indicator housing.
| 7. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY |
Align the wire with the key part of the lower position indicator housing, and install the wire. Then rotate the wire clockwise until it locks.
Securely connect the 2 wire terminals to terminal 4 (ILL+) and 8 (ILL-) of the transmission control switch connector. Then push the connector housing retainer to lock it.
Check the shift lock solenoid and indicator light wire harness as shown in the illustration.
| 8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
- Torque:
- 3 to 5 N*m{31 to 51 kgf*cm, 27 to 44 in.*lbf}
