Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1UR-FE ENGINE CONTROL
CAMSHAFT POSITION SENSOR - REMOVAL
| 1. REMOVE V-BANK COVER SUB-ASSEMBLY |
Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
| *1 | Grommet |
| *2 | Pin |
| *3 | Hook |
| *4 | Bracket |
| 2. REMOVE AIR CLEANER CAP AND HOSE |
Disconnect the No. 2 PCV hose and No. 1 air hose.
Disconnect the mass air flow meter connector and detach the clamp.
Detach the 4 clamps.
Loosen the hose clamp and remove the air cleaner cap and hose.
| 3. REMOVE CAMSHAFT POSITION SENSOR |
Disconnect the camshaft position sensor connector.
Remove the bolt and camshaft position sensor.
| 4. REMOVE VVT SENSOR |
Disconnect the 4 VVT sensor connectors.
| *A | for Bank 2 |
| *B | for Bank 1 |
Remove the 4 bolts and 4 VVT sensors.